Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kennedale
Gate installation in Kennedale typically runs $2,800 to $9,500 depending on gate width, material, operator, and whether we’re working with stable ground or Clay soil that’s already moved. Most driveway and farm-style gate installations we schedule in Kennedale are completed within one to three days once materials arrive, and we always hand you a written price before any work starts. If you’re on a horse-property lot near the southern edge of town or an older acreage parcel off Mansfield Cardinal Road, we know exactly what your gate has to hold up against. Call (817) 476-9945 and we’ll come measure, quote in writing, and schedule the work.
There’s a reason gate installation in Kennedale looks different than it does ten minutes north in Arlington. The city still allows horses and livestock on qualifying residential lots, which means many of you aren’t shopping for a decorative driveway accent. You need a 14- or 16-foot opening, a post footing that won’t lean by June, and an operator that can push real weight through a North Texas summer. That’s the work we do here. Our Gate Installation team sizes every job to the actual gate, not a catalog guess.
Why Vance Gate Repair Fort Worth Is Kennedale’s Preferred Gate Installation Company
We’re not a franchise operation. Vance Gate Repair has been independently owned and operated since 2014, founded by Adrian Vance out of commercial access-control work, and every job we take in Kennedale follows the same documentation standard we built on commercial sites: a written scope, a written price, and a photo record when we leave. That’s The Haven Standard, and it applies to every residential gate we install here.
Customers around Kennedale call us for two reasons. First, the price is on paper before we touch anything. Clause 1 of The Haven Standard says the price gets written down and handed over before work begins. No verbal estimate that drifts upward, no invoice shock at the end. Second, we dispatch from the Dallas-Fort Worth office with crews who know Kennedale’s specific soil and livestock-load conditions. We’ve installed gates on the horse-property streets near the southern city limit where the hinge posts carry more than just gate weight. We know what’s underneath the grass out here.
Every technician we send is background-checked and uniformed. You get the name and photo before arrival. And when the job is done, you get a documented photo log of what was set, what was poured, and what was wired. That’s Clause 4, Evidence on every job. It means the next technician who works on your gate, whether it’s us in three years or someone else in ten, won’t have to guess what’s underground.
Our Gate Installation Services in Kennedale
We install the full range of residential and light-commercial gates across Kennedale, from ornamental steel driveway gates on newer half-acre lots to wide pipe-and-rail ranch gates on the older homesteads. Here’s what we do most often.
Driveway Gate Installation
Driveway gates in Kennedale span two distinct worlds. On the subdivision lots built from the 1990s forward, you’re usually looking at ornamental iron or steel frame gates, 10 to 14 feet wide, with an electric operator and keypad entry. On the acreage parcels and horse-property lots, you’re looking at 14 to 16 feet of pipe-and-rail steel that has to swing clean without dragging on a driveway that may not be perfectly level. We build both. Every driveway gate installation starts with a site measure, a written quote that names the gate dimensions, materials, and operator, and a footing plan sized to the actual gate weight.
Pedestrian Gate Installation
A pedestrian gate in Kennedale usually sits beside the driveway gate or cuts through a side fence line for foot access to the pasture or workshop. We install standalone pedestrian gates from 36 to 60 inches wide, matched to the existing fence material so it doesn’t look bolted on. If you want the pedestrian gate on its own keypad or intercom zone, we wire it that way. Many Kennedale customers with livestock want the pedestrian gate to swing freely by hand while the main driveway gate stays automated. That’s a common configuration and we set the hinges and latches accordingly.
Sliding Gate Installation
Sliding gates make sense on Kennedale properties where the driveway slopes toward or away from the house, or where there’s not enough flat swing clearance for a double gate. A slider runs on a steel track and rollers, which means the post footings take a different kind of load than a swing gate. On expansive black gumbo clay, a sliding gate’s track bed needs proper aggregate base and drainage to keep it from heaving. We install cantilever and track-style sliders, sized for the gate weight and the actual slope of your driveway. The written quote covers the track, rollers, gate frame, operator, and safety edges.
Swing Gate Installation
Swing gates are the dominant install on Kennedale’s acreage lots because they’re what people with trailers and livestock need. A properly built swing gate distributes its weight through the hinge post into a footing that has to resist both gravity and clay-soil movement. We set posts below the active clay layer where possible, with concrete that’s mixed and poured to hold under wet-spring swelling and summer shrinkage. For double gates, the center alignment matters as much as the posts. A slight drop at the center means the latch doesn’t engage and the gate sags within a season. We set it right and photograph the alignment before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Kennedale
We work on whatever motor is already on your property, and we install across nine major automation brands without steering you toward one brand over another. Around Kennedale we regularly install and service LiftMaster, DoorKing, Ghost Controls, Mighty Mule, Elite, Viking, FAAC, BFT, and Linear operators. We stock common parts for these brands on the service trucks, so a control board or limit switch that fails during install doesn’t mean a three-day wait. If your existing operator still has life in it and you’re replacing only the gate, we can reuse the motor. We don’t push replacement when repair is the right call.
Common Gate Installation Problems We See in Kennedale Homes
- Heaved hinge posts from Blackland Prairie clay. Kennedale sits on expansive clay that swells in spring and cracks in summer. We regularly see gate posts that were set less than 30 inches deep, or set in undersized footings, leaning two or more inches out of plumb within a year. We size footings to the gate load and the soil, not a generic spec.
- Wide farm gates on residential-grade hardware. A 14 or 16-foot pipe gate is heavy. When it’s hung on light residential hinges and a 4×4 post, the first spring movement bends the hinge or splits the post. For livestock-width gates, we spec heavy-duty hinges and steel or properly sized wood posts.
- Solar operators undersized for the gate or shaded by post oaks. Kennedale has enough mature tree canopy, especially on the older lots, that a solar panel sized for a 10-foot gate doesn’t keep a 16-foot pipe gate running. We calculate panel output against actual gate weight and sun exposure before quoting the system.
- No loop detector on the pasture side of a horse gate. If the gate only opens by keypad or remote, a mounted rider has to dismount or lean hard to reach it. Worse, a timed auto-close can catch a horse mid-crossing. We install loop detectors and photo-eyes so the gate stays open until the horse and rider are clear.
Pricing for Gate Installation in Kennedale, TX
Here’s what gate installation in Kennedale actually costs. A standard ornamental steel driveway gate, 10 to 12 feet wide, with a single operator and basic keypad entry runs $2,800 to $4,800 installed. A 14 to 16-foot pipe-and-rail swing gate on a horse-property lot, with heavy-duty hinges, deep concrete footings sized for clay soil, and a solar-powered operator, runs $4,500 to $9,500 depending on gate weight, operator brand, and whether we’re adding a loop detector or battery backup. A double swing gate, or a sliding gate on a steep driveway, pushes toward the higher end. The price is written down before any work starts. No verbal estimate, no drift. We also give a free second opinion on any written estimate from another company. Bring us the paperwork and we’ll review it at no cost.
Call (817) 476-9945 for an exact quote on your gate. The measure and the written price are free.
We Also Serve Cities Near Kennedale
Our Gate Installation in Kennedale work puts us on the road through the surrounding metro every week. We take calls from Arlington, Burleson, Fort Worth, and Haltom City, and the same written-price standard applies everywhere we go. If you’re a few miles outside Kennedale, the process is identical: call, we measure, you get a written quote before anything gets built.
Serving Kennedale, TX - Our Local Coverage Area
We’re based in the Kennedale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Kennedale
A 16-foot pipe gate in Kennedale’s expansive clay needs a concrete footing at least 36 to 48 inches deep and 18 to 24 inches in diameter, with the post embedded in concrete all the way to the bottom. On the heaviest farm-style gates we go deeper and wider, and we add rebar. Shallower footings move within a single spring-to-summer cycle out here because the black gumbo soil swells and shrinks so aggressively. When we quote your gate, the footing dimensions are written in the scope. Call (817) 476-9945 and we’ll evaluate your soil and gate weight before you commit to anything.
Yes. On Kennedale acreage lots, where trenching mains power can mean 200 to 400 feet of electrical work across pasture or driveway, a solar-powered operator with a battery backup is usually the practical choice. We size the solar panel to the actual gate weight and the sun exposure on your property, not a generic chart, because a shaded panel or an undersized battery bank fails within months. We’ve paired Viking 3500 operators with solar arrays on southern-edge horse properties and they hold up well when the panel is placed in full sun. We’ll quote the solar configuration as part of the written price.
A slide gate usually works better on a sloped driveway in Kennedale, because a swing gate has to travel through the grade change and can drag or bind where the ground rises or falls. The tradeoff is that a sliding gate needs a track bed with proper aggregate and drainage so the clay movement doesn’t shift it. If your slope is mild, a swing gate with properly set hinges may still work. We’ll tell you which one fits your driveway, with the price for each option in writing, and you decide. Call (817) 476-9945 for a measure and written quote.
Yes, and we install one on every automated gate in Kennedale regardless of whether it’s a private farm gate or a subdivision driveway. A photo-eye, which is an infrared beam that stops the gate if something crosses the path, is the difference between a gate that bumps a horse and one that doesn’t. It also protects children and dogs. On a private farm gate with no public traffic, the safety concern is the same, and the cost is small compared to an injury or a damaged gate. Every operator installation we quote includes safety edges and photo-eyes where the gate travel requires them.
Leave at least 18 to 24 inches of clear post length beyond the hinge mount on the fence corner side, and make sure the corner post is braced or set in a footing that can take the lateral load. On Kennedale’s clay, a corner post that’s already under fence tension will move when you hang two gate leaves off it. We typically set a dedicated hinge post independent of the fence corner when the double gate carries real weight, like a 14 or 16-foot pipe-and-rail setup. We’ll flag the exact clearance and footing plan when we measure. Call (817) 476-9945 for a free on-site evaluation.
Get a Written Price Before Any Work Starts
If you’re in Kennedale and you need a gate installed, the first step is a call and a measure. We’ll come out, look at the soil, the slope, the gate width you actually need, and whether mains power is practical or solar makes more sense. Then we hand you a written price. Nothing gets built until you approve that number. Adrian Vance built this company on commercial documentation habits, and that means you get a photo record of the install and a written part list when we leave. Call (817) 476-9945 now to schedule your free estimate.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, providing gate installation in Kennedale since 2014.
Gate Installation in Nearby Areas
