Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Motor & Opener for Fort Worth Homeowners
When a gate motor fails in Fort Worth, it rarely fails quietly. The gate stops mid-swing. The opener hums but won’t move the leaf. The remote works from ten feet away but not from the street, or the keypad goes dark after a rainstorm and you’re suddenly out of the vehicle, lifting a 300-pound gate by hand. We fix these exact problems every week, because automated gates are what we do and all we do - see our Fort Worth Gate Motor & Opener service details. Since 2014, Adrian Vance and the team at Vance Gate Repair Fort Worth have repaired and installed more than 22,000 gates across the metro area, and every one of those jobs left with a written price agreed before tools came out and a photo record of what was done. Call (817) 476-9945 any hour. A live person answers, and we’ll get a technician to your Fort Worth property the same day for motor failures.
We’re the home team for gate automation in Tarrant County, and we service the motor and opener already on your gate rather than steering you toward a replacement you may not need. When you hire us, you get the same documentation habit Adrian built on commercial access-control sites starting in 2014: a wiring diagram of what we touched, photos of the limit-switch positions we set, and the part number of every component we installed.
What Our Gate Motor & Opener Service Includes
Gate motors and openers fail in patterns, and Fort Worth’s heat, rain cycles, and occasional hard freezes accelerate all of them. Here’s what we handle under this service, and what you can expect from us on each job.
Motor Installation
A new motor installation is a measured job, not an emergency dispatch: we order, schedule, and install deliberately. Most Fort Worth swing gates run an arm-style operator, while slide gates need a chain-driver motor with a separate receiver and safety loops. When we install, we set the force limitations and limit switches to the exact travel of your gate, run the power conduit cleanly, and leave you with the manufacturer’s manual marked with your settings plus our own photo log of the finished install.
Motor Repair
When a motor hums but the gate doesn’t move, or trips its breaker, or jerks through its travel, we diagnose before we quote. A motor repair on a Fort Worth property could be a failed capacitor, a stripped gear in the drive train, a burned relay on the control board, or a limit switch that lost its calibration. We name the part, show you the photo, and give you a written price for the fix before anyone touches a wrench.
Linear Motor
Linear motors are the common swing-gate operators that extend and retract a driven arm to push the gate leaf open. Fort Worth homes with a single swing gate often have a Linear or similar arm operator mounted on a post or column. We diagnose their specific failure points: stripped drive gears, failed internal limit cams, or control boards that stopped responding to the remote after a power surge or a close lightning strike.
Slide Motor
Slide motors differ from linear operators in drive mechanism, gear ratio, and fault behavior. If your gate slides on a track and it’s now stalling halfway, catching on a bent section, or throwing an obstruction fault when nothing is in the path, the motor and the track need to be assessed together. We measure draw current under load, check the receiver for lost programming, and inspect the gear rack and rollers before we quote the repair.
Intercom Integration
When a motor and opener work but the intercom at the street won’t release the gate, homeowners get stuck between systems. Vance Gate Repair Fort Worth wires and programs intercom panels to the motor’s control board so the open command arrives reliably through the existing access system. We photograph every termination, label every conductor, and leave you a record that shows exactly how the intercom, keypad, and motor talk to each other.
Battery Backup
Fort Worth thunderstorms knock out power often enough that a gate without battery backup becomes a real access problem. We install and service battery backup units that automatically open and close the gate on reserve power during outages. If your existing backup fails, we test the battery under load, replace what’s failed, and document the voltage readings so you know the system will hold when the next storm rolls through.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Motor & Opener
We work on nine major automation brands, which means we fix the motor already bolted to your Fort Worth gate instead of talking you into a brand swap. Our technicians service Ghost Controls arm operators regularly, and we stock their OEM remotes, receiver boards, and limit components on the truck. The failure we see most with Ghost Controls is a stripped plastic drive gear inside the arm, which we can replace same-day in most cases without pulling the operator from the post.
We also carry deep parts knowledge for DoorKing slide and swing operators, including their 9150 series and the older 9000 boards, and we’ve rebuilt enough Elite and Mighty Mule operators to name their failure points from the symptom description alone. Our diagnostics don’t depend on the brand of motor you have. Whether you have one of those, a LiftMaster, FAAC, BFT, Linear, or Viking, we troubleshoot what’s actually there. If we determine a replacement is genuinely needed, you’ll get a written price for the new unit and the install before any order is placed.
BeforeAfterSigns You Need Gate Motor & Opener Right Now
Some gate motor problems announce themselves with a bang. Others fail quietly and leave you locked out at the worst possible moment. Here are the warning signs we tell Fort Worth homeowners to act on immediately.
- The gate stops halfway and reverses. This usually signals a force setting that’s drifted out of calibration, or an obstruction sensor misreading. Left alone, the motor keeps fighting resistance it was never set to handle, which burns out drive gears and control boards faster than anything else we see.
- The motor hums but nothing moves. That hum is a motor under power with a failed start capacitor or a stripped gear. Running it this way for weeks overheats the windings and turns a $150 capacitor job into a full motor replacement.
- The remote only works close up. Range that shrank from 100 feet to 20 feet usually means a failing receiver board inside the opener. Sometimes it’s antenna placement, sometimes it’s signal interference from new construction nearby, but the fix starts with diagnosis, not a pile of new remotes.
- The gate slams shut instead of soft-closing. A gate that loses its soft-close setting is no longer breaking its own speed at the end of travel. That impact is how weld joints crack, hinge bolts shear, and the motor’s internal gears get hammered. It’s a safety hazard and a mechanical one.
- The keypad or intercom won’t open the gate. If the motor runs fine with a remote but ignores the keypad, the problem sits in the input wiring or the access control board. Rain, ants in the conduit, and corroded terminals do this to Fort Worth keypads every season.
Any one of these is reason enough to call (817) 476-9945. We’ll send a technician who can identify the fault, write the price, and fix it usually the same day.
Our Gate Motor & Opener Process - Step by Step
- 1
We answer and document the call. A live person answers at any hour and takes down what the gate is doing, the brand if you know it, and any photos or video you can send ahead. Before we dispatch, you know who’s coming, with their name and photo.
- 2
The technician arrives and diagnoses before touching anything. We test motor draw with a clamp meter, inspect the condition of gears and wiring, and read the limit switch positions and force settings. We also check for the problems your gate’s brand is known for, and we photograph everything before a single adjustment is made.
- 3
You get a written price, not a verbal estimate. We hand you a written scope and flat price before any repair begins. That’s Haven Standard Clause 1: have it in writing. You approve it, we start. You don’t, we leave your gate exactly as we found it and you owe nothing for the visit.
- 4
We do the work and document everything. Parts replaced, settings changed, conductors re-terminated, positions read after the fix. You receive a photo log and a written record, including the part numbers installed and the new limit-switch settings, so no future technician ever has to guess what was done.
- 5
We test the gate through full cycles. Before we leave, we run the gate open and closed through at least ten full cycles, test every remote and keypad on site, and confirm the safety sensors trigger correctly. If something is not right during testing, we catch it there, not after we’ve left your driveway.
How Much Does Gate Motor & Opener Cost in Fort Worth?
Gate motor and opener pricing in Fort Worth follows the scope of the job, not the mood of the technician; for a full breakdown, see our Gate Motor & Opener cost guide. A motor repair like a capacitor or limit switch replacement or a receiver board swap typically runs $180 to $420, depending on the part and the brand. A complete opener replacement for a single swing gate generally lands between $1,200 and $2,600, including the motor, arm, receiver, and installation, with the spread driven by whether you run Linear, Ghost Controls, DoorKing, or a commercial-grade unit. Slide motor replacements run higher, usually $2,400 to $4,500, because the chain, sprockets, and track condition all factor into the final number. A new motor installation with conduit runs, breaker, and safety sensors typically falls between $2,800 and $5,000 for a full swing gate setup in Fort Worth.
What moves the price: brand, gate weight and length, condition of the brackets and hinges, whether the control board is still good, and whether the job needs new conduit or a power run. The way to avoid overpaying is the written quote. You get a flat number on paper, approved by you, before any component is ordered or any tool comes out of the truck. No surprise invoice at the end. And if you have a written estimate from another company, bring it to us and we’ll review it at no cost as a free second opinion.
Every written estimate includes the part number, the labor, and what we’ll photograph and leave with you when the job is done. Call (817) 476-9945 and we’ll give you a real number, on paper, before work begins.
Gate Motor & Opener Near Fort Worth - Our Service Area
From our base in Fort Worth, we dispatch to Gate Motor & Opener in Haltom City and Gate Motor & Opener in Saginaw as well as White Settlement, Richland Hills, Watauga, Forest Hill, North Richland Hills, Benbrook, Hurst, Kennedale, and Keller. Most motor repairs inside the Fort Worth city limits get a technician the same day you call. Our Gate Motor & Opener in Fort Worth coverage means your technician arrives already knowing the gate brands and the failure patterns common to this part of Tarrant County.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Motor & Opener in Fort Worth
A gate motor and opener is the powered assembly that automatically opens and closes a driveway gate, consisting of the motor, drive arm or chain, control board, receiver, and safety sensors. In Fort Worth, these systems swing or slide gates on demand from a remote, keypad, or intercom. When any one of those components fails, the whole system stops behaving, which is why we diagnose the entire opener rather than just replacing parts blind.
Most motor repairs are same-day jobs. A capacitor replacement, limit switch recalibration, receiver board swap, or stripped gear repair usually takes between one and three hours on site, depending on the brand and how accessible the operator is. We carry common OEM parts on the truck, so the majority of Fort Worth repairs are completed in one visit. If a part has to be ordered, we tell you the timeline and give you the written price before placing the order. Call (817) 476-9945 and we’ll give you a realistic window for your specific gate.
A gate motor replacement in Fort Worth typically runs $1,200 to $2,600 for a swing gate operator and $2,400 to $4,500 for a slide gate motor. The spread depends on the brand, the gate’s size and weight, whether the control board and brackets are reusable, and whether new wiring or conduit is required. You’ll get an exact written number before any work starts, not a phone estimate you have to trust. Call (817) 476-9945 for a free written estimate.
Yes. We service Mighty Mule and Ghost Controls openers regularly, and we stock OEM parts for both brands on the truck. The failures we see most with Mighty Mule are control board issues after power surges, while Ghost Controls units more often develop a stripped plastic drive gear inside the arm. Both are repairable in most cases, and we’ll give you a written price for the fix before we start.
Yes. We offer same-day service for motor failures in Fort Worth, and a live person answers the phone 24 hours a day, seven days a week. If your gate is stuck open, stuck closed, or partly open and you can’t secure the property, call (817) 476-9945 and we’ll dispatch a technician as soon as one is clear, with their name and photo sent to you before arrival.
Every completed job carries our 365-Day Done Right Promise. If the repair is not right within one year, we make it right at no additional charge, with no argument and no fee. That covers the full scope of work we performed, and it’s part of The Haven Standard on every visit, not an upsell or a paper promise. Call (817) 476-9945 and we’ll walk you through what the warranty covers for your specific repair.
Turn off the power to the gate operator at the breaker if it’s safe to reach, and clear any obstructions from the gate’s path so we can run a full diagnostic without clearing debris first. Do not attempt to open the motor housing yourself; high-voltage capacitors inside can hold a charge even when the power is off. Note the brand and approximate age of the system, and take a photo or short video of what the gate is doing, which helps us bring the right parts on the first visit.
Schedule Your Gate Motor & Opener Service in Fort Worth Today
You’ll get a named technician with a written price before the work starts, a documented photo record of everything we touch, and our 365-Day Done Right Promise on the back of it. Call (817) 476-9945 any time for a free, no-obligation estimate, or to get same-day service on a gate motor that has already failed. A live person answers.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, serving Fort Worth since 2014.