Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Richland Hills
A new gate in North Richland Hills is a decision you’ll live with for twenty years, and the single most important variable is what’s under it. We install driveway gates, swing gates, sliding gates, pedestrian gates, and security gates throughout NRH, every job quoted in writing before work begins. Call (817) 476-9945 and a live person answers, day or night. No voicemail loop. No callback queue. We schedule from our Dallas-Fort Worth office and crews dispatch locally to North Richland Hills.
Most gate failures here trace to the same place: Tarrant County’s shrink-swell clay. The clay cracks open in August, swallows spring rain, and moves everything sitting on it. That means footing depth, backfill material, and post anchoring are not details we mention after the fact. They are the job.
Why Vance Gate Repair Fort Worth Is North Richland Hills’s Preferred Gate Installation Company
North Richland Hills is a fully built-out suburb. Almost no new large residential tracts remain, which means the gate stock across the city is largely one age cohort: homes built from the late 1960s through the mid-1990s. Those original wood privacy-fence swing gates and early ornamental iron driveway gates are now 30 to 55 years old, and they are failing on a neighborhood-wide schedule. Residents from Smithfield to Home Town to the neighborhoods off Rufe Snow Drive call us because the gate that worked for decades finally gave out. The fix requires more than a hinge replacement. It usually requires re-setting posts in soil that has been shifting for years.
Adrian Vance founded this company in 2014 after years of commercial access-control work, where documentation was non-negotiable. Every visit we make in North Richland Hills leaves a photographed record: what was found, what was set, what was installed. You get a written price before any work starts, and a written record when we leave. That’s our 365-Day Done Right Promise. If it’s not right within a year, we make it right. No argument, no fee.
Our technicians are background-checked and uniformed. You get a name and photo before arrival. And when North Richland Hills homeowners call with an emergency, a live person answers (817) 476-9945 at any hour. That matters when a gate is stuck open at 2 a.m. and the dogs are inside.
Our Gate Installation Services in North Richland Hills
We install all gate types common to NRH’s housing stock, and we service the automation that runs them. Here’s what North Richland Hills homeowners ask for most.
Swing Gate Installation
Swing gates are the dominant gate type across North Richland Hills, particularly the double swing gates on 1970s and 1980s ranch homes. A solid infill swing gate catches wind like a sail. During spring storm season, that wind load torques the hinge post until the footing shifts. We size footings for wind exposure, not just gate weight, and we set them deeper than code minimums because NRH clay demands it. Every swing gate installation includes a manual-release override you can operate by hand when the power cuts out.
Driveway Gate Installation
Driveway gates in North Richland Hills range from original ornamental iron on the older west side to steel and aluminum frames installed in the last decade. The common failure is the same regardless of material: the post under the operator side has leaned, and the rack or arm no longer lines up. We bore new footings to 36 inches or deeper, backfill with crushed limestone instead of native clay, and re-hang the gate plumb. The gate works because the ground under it finally works.
Sliding Gate Installation
Sliding gates make sense on NRH properties with short driveways or slopes where a swing gate would scrape. They are also the gate type most sensitive to post movement, because a sliding gate rides a fixed track. If one post heaves even a half inch, the gate binds. We set sliding gate footings below the seasonal moisture zone and use crushed limestone backfill specifically to resist the shrink-swell cycle. Where the existing concrete apron allows, we install a cantilever slide that never touches the ground at all.
Pedestrian Gate Installation
Pedestrian gates alongside driveways and along side yards see more daily cycles than any other gate on the property. In NRH’s clay soil, a pedestrian gate with shallow posts will lean within two years and start dragging at the latch. We set pedestrian posts the same way we set driveway posts: deep, plumb, and backfilled with material that drains. It’s a small gate, but the footing still has to be right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in North Richland Hills
We work on whatever motor is already on your property, rather than steering you toward a replacement you don’t need. Our North Richland Hills customers commonly have operators from DoorKing, Elite, Viking, Ghost Controls, and five other major automation brands. We carry common parts locally and can usually complete a motor or control-board swap in one visit. If your existing operator can be repaired, we repair it. If the motor is dead and the board is obsolete, we’ll quote a replacement in writing and install it with the same documentation standard.
Common Gate Installation Problems We See in North Richland Hills Homes
- Posts heaving on shrink-swell clay. Tarrant County clay moves with the seasons. A post set in a shallow concrete footing will heave within the first year, which is why we bore to 36 inches and use crushed limestone backfill on every new NRH installation.
- Wind load torquing solid infill gates. Severe spring storms push hard against solid wood and iron panels. The hinge post takes the load, and the footing shifts, and then the gate sags. Fixing the sag requires resetting the post before touching the hardware.
- 1970s-era iron gates with weld failures. NRH’s original ornamental iron gates have survived decades of hail, freezes, and moisture. The February 2021 hard freeze cracked welds that had been marginal for years. Many of those gates are now beyond repair and need full replacement.
- Automation installed without entrapment protection. Older automatic gates in NRH sometimes lack UL 325 compliant photo-eyes and edges. That’s a safety hazard and an inspection fail. We install current-sensing, photo-eye, and contact-edge protection on every automated gate job.
Pricing for Gate Installation in North Richland Hills, TX
Gate installation pricing in North Richland Hills reflects the material, the gate type, and the footing work. Here’s what we see in this market:
- Pedestrian gate installation: $850 to $2,400, including posts and hardware
- Single swing driveway gate (steel or aluminum frame, partial infill): $3,200 to $6,500
- Solid infill wood swing gate: $2,800 to $5,200, depending on the species and panel design
- Sliding gate installation with automation: $4,800 to $9,000, including the operator and safety edges
- Post-only replacement or reset: $950 to $2,200 per post, depending on footing depth and demolition
What moves the price? Footing depth on clay soil, the wind rating of the panel, the weight of the gate, and whether existing automation can be reused. Before any work begins you receive the full written price on paper. If the scope changes during the job, you approve the change in writing before we proceed. No surprise invoice at the end.
Call (817) 476-9945 for a free estimate. A live person answers.
We Also Serve Cities Near North Richland Hills
Our crews serve North Richland Hills and the surrounding area, including Hurst, Haltom City, Bedford, and Colleyville. If you’re outside NRH but need Gate Installation help, call us and we’ll let you know immediately whether we can schedule you. We also maintain a dedicated page for Gate Installation in North Richland Hills with local pricing and soil conditions.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Richland Hills
For a standard driveway swing or sliding gate in North Richland Hills, we bore post footings to 36 inches minimum, below the seasonal moisture zone of Tarrant County clay, and backfill with crushed limestone. Code minimum is shallower. The clay here moves enough in one wet spring to heave a 24-inch footing. Call (817) 476-9945 and we’ll give you a written price that includes the proper depth.
A solid infill wood gate on a standard 4×4 or 6×6 post will likely fail at the hinge post during the first severe storm season. North Richland Hills gets hit hard in spring, and a solid panel catches full wind load. We install steel-reinforced posts or steel posts with wood cladding, sized for the panel’s wind exposure. The price is higher, but the gate does not sag in year two.
Solar openers in North Richland Hills work, but they need a battery buffer sized for consecutive overcast days, which are common in March and April. We quote solar systems with a two-to-three-day battery reserve, sometimes supplemented by a low-voltage AC feed where the gate sees heavy daily use. Get the written price before deciding. Call (817) 476-9945.
Every automatic gate we install in North Richland Hills includes a clearly labeled manual release, typically a pull handle or key that disengages the operator, after which the gate can be moved by hand. We show you the procedure at installation and document it. Do not force an automated gate when the power is out without disengaging the operator first, because some units lock the arm. The manual release is there for that exact situation.
Many NRH ornamental iron gates from the 1970s have weld failures that started with hail-initiated rust and were finished by the February 2021 freeze cycle. Once multiple welds crack and the frame is rusting from the inside, repairing one weld just moves the stress to the next. Full replacement costs more today but avoids the same customer paying for a second repair in six months. We’ll photograph the condition and give you the option in writing.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, serving North Richland Hills since 2014.