Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Bedford
Gate repair in Bedford, TX usually comes down to one thing the homeowner didn’t expect: the post moved, not the hardware. Bedford’s black clay soil expands after fall rains and shrinks during summer drought, heaving posts out of plumb season after season. A gate that dragged last week may latch fine today, then bind again after the next storm. That’s the cycle we fix. If your gate won’t close, sags, or drags across the driveway, call Vance Gate Repair Fort Worth at (817) 476-9945. We’ll name the problem, write the price, and fix it right the first visit.
Why Vance Gate Repair Fort Worth Is Bedford’s Preferred Gate Repair Company
We’ve built our reputation in Bedford on something most gate companies don’t do: we write the price down before anyone picks up a tool. That’s Clause 1 of The Haven Standard, and it’s not negotiable on any job we run in Bedford. Homeowners in neighborhoods like Meadow Creek, Shady Brook, and the original 70s-era streets off Harwood Road know they’ll get a written scope of work, a flat price, and a documented photo record before we leave the driveway. No verbal estimate followed by an invoice that looks different.
Adrian Vance started this company in 2014 doing commercial access-control work, where every job required wiring diagrams, limit-switch readings, and photographs of what was changed. We brought that same documentation habit to residential gate repair in Bedford. When our tech resets a heaved post or replaces a seized hinge, you get a record of exactly what was found, what was set, and what part went in. If a future repair is ever needed, no one has to guess what happened last time.
Our crews serve Bedford directly. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the technician who shows up at your gate works Bedford routinely and knows this soil. A live person answers the phone 24 hours a day, seven days a week, so when your gate won’t open at 6 a.m. on a workday, you talk to a human immediately.
Our Gate Repair Services in Bedford
Electric Gate Repair
Bedford’s older subdivisions are full of original swing gates that owners later automated, often with a retrofit operator wired into a 40-year-old post. The operator mounts to the post, so when the post heaves, the motor shifts with it. A Photo-eye misaligned by two inches stops working. A limit switch reading 12 degrees past travel burns out circuit boards. We diagnose the electrical side and the structural side together, because in Bedford they fail together. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. One company, whatever motor is already on your property.
Automatic Gate Repair
Automatic gate repair in Bedford often starts with the same question a homeowner can’t answer: is this an operator problem or a post problem? On a wide acreage entrance or a long driveway gate, a three-degree post lean changes the geometry enough to bind the arm mechanism and burn out the motor over time. We measure the post, check the operator’s current draw, reset the limits, and photograph every adjustment. You get the written record before we leave.
Hinge & Post Repair
This is the defining repair in Bedford. The original 1970s and 1980s cedar privacy gates are now 40 to 50 years old, and many were set on shallow concrete footings that never accounted for Tarrant County clay movement. When the post heaves, hinge alignment fails, latches stop catching, and the gate swings into the post or drags the driveway. We reset heaved posts in deeper concrete pours, replace rotted hinge posts, and re-weld broken hinge plates on steel gates. Before replacing any hardware, we fix the post that caused the failure.
Gate Realignment
A gate that won’t latch in Bedford usually isn’t a bad latch. It’s a post that moved. We realign swing gates by resetting the hinge-side post, shimming the frame, or re-hanging the gate leaf so it clears the driveway and catches the latch cleanly. On wood gates from the original build-out era, sag correction often involves repairing the bottom rail and adding a tension rod or anti-sag kit before any hardware adjustment will hold. We photograph the final alignment and hand you the record.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Bedford
We service nine major gate-automation brands, so the work we do in Bedford isn’t a sales pitch for a new operator. If your Ghost Controls arm is binding, we fix the arm. If a DoorKing board is throwing a fault code, we diagnose the board. If an Elite slide gate is stopping mid-travel, we check the photo-eyes and the limit switches before anything else. We carry common parts in our trucks and have same-week supplier access for the rest. No steering you toward a replacement when the repair is the right call.
Common Gate Repair Problems We See in Bedford Homes
- Heaved posts after rain cycles. Bedford’s black clay swells after fall and spring rains, pushing posts up and out of plumb. The gate binds, the latch misses, and no hinge adjustment fixes it. The post has to be reset.
- Rotted bottom rails on original wood gates. Cedar and pressure-treated gates from the 1970s and 80s are at end-of-life. The bottom rail absorbs moisture from the soil line, rots out, and the gate sags. We sister-reinforce or rebuild the frame and re-hang the leaf.
- Cracked post footings. The drought-to-rain cycle in North Texas cracks shallow concrete footings, allowing the post to sway. We saw this exact failure in Meadow Creek, where a 40-year-old cedar swing gate dragged across a driveway. The hinge post had heaved two inches after fall rains and the footing had split. We reset it with a deeper pour and added a solar gate opener with a loop detector for the long entrance. The gate opens from 50 feet out now.
- Hydraulic operator failures on long driveways. Wide gates on acreage-style properties stress operators that weren’t sized for the span and wind load. When the operator fails, we check the post first, then the arm geometry, then the motor. Fixing an operator on a moved post is wasted work.
Pricing for Gate Repair in Bedford, TX
Most hinge and post repairs in Bedford run $220-$480, depending on whether we’re resetting one post or two and whether the footing needs a new concrete pour. Gate realignment work typically falls between $180-$400, including sag-correction on wood gates. Electric gate repair ranges from $260-$650 for operator diagnosis and board or limit-switch repair, up to $900-$1,600 for a full swing-gate motor replacement when the arm bracket is intact. If the bracket itself is damaged, expect to add $75-$150 in parts and labor.
These are flat, written prices. You get them before any work begins. Not after. The price we write on the scope is the price you pay. If another company handed you a written estimate, bring it to us. We’ll review it at no cost and give you a second opinion. Call (817) 476-9945 for a free estimate on any gate repair in Bedford, TX.
We Also Serve Cities Near Bedford
Our crews work throughout the Mid-Cities and H-E-B. If you live in Colleyville, Euless, Hurst, or North Richland Hills, we send the same documented, written-price service there. You can also read more about our full Gate Repair service area across the region. If your driveway is in Bedford, we’re the crew already working your neighborhood this week.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Bedford
Because the post moved. Bedford’s expansive black clay swells when it absorbs water, lifting the post and throwing the gate out of alignment. The hinges aren’t the problem, so tightening or lubricating them won’t do anything. The post needs to be reset, usually with a deeper footing. Call (817) 476-9945 and we’ll confirm it on site.
Yes, provided the gate is properly balanced and the post is plumb. A 16-foot gate puts real wind load on an operator, so the post has to be rock solid before mounting. We install solar openers sized for the span, add a loop detector where the driveway approach allows, and document every setting. If the post is heaved, the solar opener won’t hold its travel limits. We fix the post first.
We excavate the old footing, inspect the post base for rot or corrosion, pour a deeper concrete footing, and set the post plumb before re-hanging the gate. The depth matters in Bedford because clay movement is seasonal and shallow footings crack. We photograph the old footing, the new pour, and the final gate alignment, and leave you that record.
UL 325 requires that automatic gates have at least two entrapment protection devices, such as photo-eyes, edge sensors, or an inherent reversing mechanism. If your gate doesn’t reverse when it contacts resistance or if the photo-eye is misaligned or missing, it does not meet the standard. We test and document entrapment protection on every automatic gate we service in Bedford. A gate that doesn’t reverse on contact is a safety failure, not a convenience issue. Call us to inspect it.
Most sags on 1970s and 80s wood gates in Bedford are repairable if the top rail and posts are sound. We sister-reinforce the rotted bottom rail, add an anti-sag kit or tension rod, and re-hang the gate with new hinges before realigning the latch. If the frame is rotted through in multiple places, replacement is the honest answer and we’ll tell you that in writing with photos to support it. Call (817) 476-9945 for an exact assessment and a free estimate.
Call Vance Gate Repair Fort Worth for Gate Repair in Bedford, TX
Your gate is the weakest point of your property line, and in Bedford it’s fighting the soil every season. We fix the post first, document everything we find, and hand you a written price before work begins. Under the 365-Day Done Right Promise, if the repair isn’t right within a full year, we make it right at no charge. A live person answers the phone 24/7. Call (817) 476-9945 now for a free estimate on gate repair in Bedford, TX.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, serving Bedford and the surrounding Mid-Cities since 2014.
Gate Repair in Nearby Areas
