Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Hurst
When a gate motor fails in Hurst, it rarely fails politely. You’re either stuck inside your driveway at 6:45 a.m. or watching a swing gate arc halfway and grind to a stop. We repair and install gate openers across Hurst every week, and the calls have a pattern: clay soil shifting posts, motors fighting fence lines that moved, and older operators asked to do more than their frame allows. A Gate Motor & Opener failure means a driveway you can’t trust. We get it running and we show you what we found before we leave. Call (817) 476-9945 and a live person answers, day or night.
Why Vance Gate Repair Fort Worth Is Hurst’s Preferred Gate Motor & Opener Company
We handle Gate Installation in Hurst and throughout Dallas-Fort Worth, and our technicians know Hurst’s streets, not just the map. The neighborhoods off Precinct Line Road, the older subdivisions near Pipeline Road, the ranch-style acreages on the city’s quieter edges. Each pocket of Hurst has its own gate challenges, but the soil underneath doesn’t change. Blackland Prairie clay expands hard after rain and contracts in summer. Posts move. Operators bind. That’s the job.
Every Hurst visit gets the same treatment we’ve provided on 22,000+ gate jobs since 2014: a written price before any tool comes off the truck, a background-checked technician whose name and photo you’ll have before arrival, and a photo record of what was found, adjusted, and installed when we leave. That’s not a courtesy. It’s Hurst homeowners getting commercial-grade documentation on a residential gate, the same habit our founder Adrian Vance built in commercial access-control work.
Our 365-Day Done Right Promise covers every repair. If the gate isn’t right, we come back and make it right, no fee, no argument, for a full year.
Our Gate Motor & Opener Services in Hurst
Motor Installation
A new operator on a Hurst gate has to survive two things at once: the weight of the gate and the movement of the ground beneath it. We install swing and slide motors with the post condition in mind. On older Hurst properties where the hinge post has drifted out of plumb over decades of wet-dry cycles, we address the post before we mount the operator. No motor holds a limit setting when its mounting point keeps moving.
Motor Repair
Most Hurst motor repair calls are not motor failures at all. They’re alignment failures. A drive gear strips because the gate started dragging. An arm binds because the post leaned a quarter inch. We diagnose the full system, not just the motor housing. That means checking post plumb, hinge wear, track level, and limit switch position before we quote a repair. You get the number in writing, and we tell you exactly what we’ll replace and why.
Linear Motor
Linear operators work well on Hurst slide gates, especially the wider driveway entrances common on acreage properties. But a linear motor on an unlevel track or against a gate that’s picked up clay-driven resistance will burn through gears fast. We set the track grade, verify the chain or belt tension, and tune the force settings so the motor isn’t fighting the gate. We service Linear motors among the nine automation brands we carry, and we keep common repair parts in local stock.
Slide Motor
Slide gates on Hurst acreage entrances span more distance than a swing gate ever will. That span means more gate weight, more wind load, more track wear, and more strain on the operator. Slide motor problems here are rarely mysterious: a bent track bracket from a shifted post, a wheel bearing gone dry, a motor asked to pull a gate that weather and soil have made harder to move. We correct the resistance before we call the motor fixed, because that’s the only way the repair actually holds.
We also handle the supporting pieces many Hurst acreage properties need: solar gate opener setups where running mains power to the gate is impractical, and battery backup systems sized properly for North Texas winters, not just for the three sunny days after installation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hurst
Your Hurst gate likely has a Linear, Viking, Ghost Controls, or DoorKing operator on it, and we service all of them. We don’t steer repair calls toward replacement or push a single brand. If the motor on your gate is a Viking and we can get it running reliably, that’s what we do. If it’s a Ghost Controls arm that needs recalibration, we recalibrate it. We work across nine automation brands so the brand on your gate doesn’t force a decision you don’t want to make. Parts availability in Hurst is helped by our Dallas-Fort Worth dispatch office coordinating local stock.
Common Gate Motor & Opener Problems We See in Hurst Homes
- Clay-driven post drift throwing off limit settings. After a wet spring, Blackland Prairie clay swells and pushes gate posts out of plumb. The operator arm or track bracket moves with it, and suddenly the gate won’t close fully or reverses mid-cycle. This is the single most common Hurst pattern we see, and it shows up on gates that are only a few years old.
- Heat-warped gate panels on west-facing acreage entrances. Hurst summers routinely pass 100°F, and an uncoated wood gate in direct sun will warp enough to add significant drag. The motor works harder, the amp draw climbs, and the motor fails sooner. We see swing motors that burned out not because they were defective, but because the gate itself gained weight and resistance every summer.
- Solar openers dying during overcast winter stretches. A solar gate opener installed without adequate battery amp-hours will run fine through sunny weeks, then fail during the cloudy stretches North Texas gets from December through February. Hurst acreage gates that lose power in winter are often running solar with undersized battery storage. We size battery backup for the worst week of the year, not the best day.
- Stripped swing-arm gears from posts that have migrated over decades. On older Hurst subdivisions near Precinct Line Road, we’ve found hinge posts that moved more than an inch over the life of the property. Rehanging the original hardware won’t hold. The post needs resetting in a deeper concrete footing before any hinge, arm, or latch adjustment will survive a full seasonal cycle.
Pricing for Gate Motor & Opener in Hurst, TX
Here’s the flat range, in dollars, for Hurst work:
- Diagnostic visit: $89-$149, applied to the repair if you approve the work.
- Swing gate motor repair (arm replacement, gear rebuild, limit reset): $220-$480, depending on brand and what failed.
- Slide motor repair (chain/belt tension, gear replacement, track alignment): $260-$550.
- Full operator replacement (swing or slide, parts and labor): $900-$2,400, depending on motor size, brand, and whether we need to reset a post or add a battery backup.
- Solar gate opener installation with battery backup: $1,600-$3,400, sized for the gate’s width, weight, and winter use.
The price we quote before work starts is the price on the invoice. No surprise line items. No discovery fees after the fact. You approve the number in writing first, under Clause 1 of our Haven Standard. Estimates are free. Already have a written estimate from another gate company? Bring it and we’ll review it at no cost as a second opinion.
We Also Serve Cities Near Hurst
Along with Hurst, our technicians regularly cross into Gate Motor & Opener in Hurst-adjacent communities: North Richland Hills, Bedford, Colleyville, and Haltom City. The same soil challenges follow the Mid-Cities line, and we schedule Hurst-area calls without routing you through a distant dispatch maze. Call (817) 476-9945 and tell us which city you’re calling from.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Hurst
Because the Blackland Prairie clay under your posts expands when wet and contracts when dry, and that movement shifts the post the operator is mounted to. On a Hurst gate installed within the last five years, we often find the hinge post has moved a quarter to a half inch after a single wet season. That’s enough to throw off arm geometry and limit settings. The fix is resetting the post in a deeper, wider footing, then recalibrating the operator. Call (817) 476-9945 for a written quote on the reset.
Yes, if the battery bank is sized for Hurst winters, not just summer sun. A solar opener with two small batteries will run a gate through sunny months, then fail during the overcast stretches common from December through February. We size battery amp-hours for multi-day autonomy, and we mount panels where tree canopy and fence lines won’t shade them. For a Hurst acreage gate, expect solar installation to start around $1,600 with proper battery backup.
A slide motor with a properly graded track, or a heavy-duty swing operator on a post that’s been reset in deep concrete. The operator brand matters less than the preparation under it. We’ve installed Viking and DoorKing slide motors on Hurst-area farm gates that held through years of clay movement because the track was leveled and the post footings were poured correctly. If the gate itself is light and the post is solid, a Linear or Ghost Controls arm can work. We’ll tell you what we’d put on your gate, in writing, before you spend anything.
Yes. Photo-eyes and force settings that stop and reverse the gate are not optional on a working ranch entrance. An opener without working entrapment protection can push a gate into an animal or person, and the force a slide motor can apply is enough to cause real harm. We set photo-eye height and force limits for the specific traffic that uses the gate, whether that’s a pickup, a horse trailer, or livestock crossing the driveway. This is safety-critical work; it’s not a place to skip a step.
February in Hurst brings the freeze-thaw cycle. Water gets into hinge pins, gear housings, and track rollers, then freezes and expands. Metal cracks, plastic gears shear, and motors that worked fine in December stall out. Winter Storm Uri in February 2021 was the extreme version, but even a normal North Texas winter puts gate motors through freeze stress every year. If your gate failed during a cold snap, we can tell you whether the fix is an adjustment, a part replacement, or a better-sealed motor for the next freeze. Call (817) 476-9945 for a diagnostic visit.
Call Vance Gate Repair Fort Worth for Gate Motor & Opener Work in Hurst
If your gate motor is grinding, dead, out of alignment, or just unreliable in wet weather, call (817) 476-9945. We’ll put a live person on the line, schedule a Hurst visit, and hand you a written price before any work begins. Under Clause 4 of our Haven Standard, every visit comes with a photo log of what we found and what we left behind. The 365-Day Done Right Promise covers the repair for a full year. That’s the standard we’ve kept on 22,000+ gate jobs since 2014, and it’s the standard your Hurst gate gets.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, serving Hurst gate motor and opener needs from the Dallas-Fort Worth metro.