Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keller
Gate repair in Keller usually means one of two things: a motor that stopped responding, or a gate that no longer swings true. The motor side we diagnose down to the limit switch setting. The alignment side almost always traces back to Keller’s black gumbo clay, which shrinks in summer and heaves in winter, tilting posts out of plumb by an inch or more. We dispatch technicians to Keller throughout the week, and a live person answers at (817) 476-9945 whenever you call. No automated attendant.
If you own one of the custom ornamental iron gates common in Keller’s estate neighborhoods, you already know that a 16 or 18 foot gate cannot force its way back into alignment on its own. It needs the hinge post reset, the arc re-verified, and the operator re-tuned to the new geometry. We write the price down before any work starts, and we leave you a photo record of what we found and what we changed. That is how every Keller job runs.
Why Vance Gate Repair Fort Worth Is Keller’s Preferred Gate Repair Company
Most of the gates we service in Keller are 15 to 25 years old. That is not a problem in itself. What matters is that the technician knows which of those aging components are worth saving and which are past their service life. Adrian Vance started on commercial access control in 2014, and that documentation habit carried into residential work. Every Keller visit ends with the same thing: a written scope, a written price, and photographs of the evidence.
We service nine automation brands, but around Keller Parkway and Bear Creek Parkway, two names come up constantly: Viking and Linear. These were the specs of choice for 1990s and 2000s estate gates, and many are now orphaned by parts shortages. We keep retrofit kits on hand specifically for those units, because Keller homeowners tend to keep the same gate for 20 years and expect it repaired, not swapped out.
Our technicians arrive in uniform, background-checked, with name and photo sent before we show up. No vague window, no unmarked truck. The estimate is free, and the written price is in your hand before a single tool leaves the truck.
Our Gate Repair Services in Keller
Electric Gate Repair
Electric gate repair in Keller typically means the gate has power but won’t run, or it runs and stops mid-travel. On Viking and Linear slide operators from Keller’s estate buildout, we often find the rack-and-pinion mesh has degraded as the pad-mount concrete cracked. You hear the motor strain, then the gate stalls. The fix is usually a re-mesh and a motor torque reset, not a replacement. We’ll tell you which one the evidence supports, with photos.
Automatic Gate Repair
When a Keller automatic gate refuses to open or reverse, the culprit is frequently a photo-eye knocked out of alignment by post movement, or a ground loop compromised by frost heave in Keller’s freeze-thaw cycles. We reset both, then we run the gate through full open and close cycles while you watch. Before we leave, you get a photo log of every adjustment and a written record of the part number installed.
Hinge & Post Repair
Keller sits on Blackland Prairie clay, and it moves. We have reset hinge posts on estates off Bear Creek Parkway that heaved three inches out of plumb in a single wet winter. The repair is structural, not cosmetic: excavate, pour a deeper post footing with rebar, rehang the gate with fresh bearings, and re-verify the swing arc. If you attempt to keep the old post, the gate re-binds within months and burns out the operator motor.
Gate Realignment
A Keller gate that drags the ground or won’t close against the stop has usually shifted at the hinge or at the post. Realignment means re-setting the gate’s travel limits, re-balancing the leaf weight, and adjusting the operator force to match. On ornamental iron swing gates, we often find the hinge itself has been cutting into a worn bearing. We replace the bearing while we’re in there. The gate should close with two fingers of effort at the latch end.
Lock Repair
Most Keller driveway gates use either a magnetic lock or a mechanical gate lock tied to the access system. Failure modes here split two ways: the lock itself is worn, or the gate shifted enough that the lock no longer lines up with the strike. We solve the alignment first, then the hardware. A lock that binds because the gate moved will fail again no matter how much money you put into the latch.
Weld & Rust Repair
Keller’s ornamental iron gates are beautiful, heavy, and exposed to North Texas humidity swings. Weld failures most often appear at the hinge-side lower picket and the post-to-rail joint. We grind, re-weld, and refinish to match the existing patina as closely as possible. If rust has penetrated the steel, we cut the section out and splice fresh material in. You get a photo of the cut, the weld, and the finish before we put the torch down.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Keller
We work on whatever motor is already on your property. In Keller, that most often means Viking and Linear units from the local estate buildout, plus DoorKing on some of the larger equestrian and ranch gates along Bear Creek and Old Keller Road. We carry common retrofit parts and controller boards for all three, which means faster turnaround when your gate is down and you need it working before the next cold front or the next time your horses get curious about an open gate.
Common Gate Repair Problems We See in Keller Homes
- Post heave from black gumbo clay: Keller’s soil shrinks in summer drought and expands in wet winters, tilting hinge posts and throwing swing gates out of arc. This is the most common gate repair in Keller, and it is structural work, not a lubricant fix.
- Viking and Linear operator wear: The 1990s and 2000s estate gates around Keller Parkway commonly spec’d these brands. Many are now orphaned, with discontinued boards and fading gearmesh. We keep retrofit kits ready for these units specifically.
- Frost-heaved ground loops and iced chain drives: North Texas ice storms are more common than snow, and they seize exposed operators and snap safety loops embedded in cracked concrete. The gate fails on the exact day you need it latched.
- Ornamental iron hinge fatigue: Heavy estate gates concentrate stress at the lower hinge, especially when the post has moved. We see cracked welds and wallowed-out bearing seats on Keller ironwork more than any other single failure point.
Pricing for Gate Repair in Keller, TX
What should you expect to pay for gate repair in Keller? Let’s put numbers on it. A photo-eye realignment or limit-switch reset typically runs between $125 and $225. A hinge bearing replacement on a residential swing gate sits in the $300 to $650 range, depending on the gate’s weight. Post reset work, which includes excavation and a new concrete footing, usually lands between $800 and $1,600 per post in Keller, where clay soil often demands deeper footings than sandier neighbors like Southlake. A full operator replacement on an existing gate ranges from $1,100 to $2,800 depending on brand and travel length. Before work starts, you receive the flat written price. No invoice surprises at the end. Call (817) 476-9945 for a free written estimate, and bring any competitor’s written quote if you want a free second opinion.
We Also Serve Cities Near Keller
Our crews out of the Dallas-Fort Worth office cover Keller and the surrounding Tarrant County suburbs, including North Richland Hills, Southlake, Haltom City, and Colleyville. If you’re a Keller homeowner who just read this page, call (817) 476-9945 and we’ll schedule a Keller visit directly. For a broader look at the work and the brands we service, see Gate Repair.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Keller
Keller sits on Blackland Prairie clay, a soil that shrinks hard in drought and swells in wet cycles, tilting posts and pulling gates out of alignment faster than in sandier suburbs. The sway is not the gate failing, it is the ground moving under the post. Repair means resetting the post and re-verifying the arc, which we do with photographic documentation. Call (817) 476-9945 to schedule a Keller evaluation.
Most Keller HOA communities with ornamental iron perimeter access gates require architectural review before replacing a visible gate operator, and in some cases the approval window runs 2 to 4 weeks. Before committing to any work, check your HOA’s design guidelines and submit the replacement’s cut sheet and finish options. We have walked enough Keller homeowners through this process to know what most committees ask for, and we can prepare the documentation for you.
The reversal function on a Viking operator depends on the force setting and the condition of the gearmesh. If the force limit is too high or the rack-and-pinion mesh has worn from pad-mount movement, the motor will keep pushing rather than reverse. We inspect the gearmesh, reset the force incorrectly for Keller’s temperature swings, and verify with a live obstruction test. Call (817) 476-9945 and we’ll walk you through what we should check on your specific unit.
Yes, and this is a common Keller repair. We cut back the rusted section, splice in new steel plate matched to the original thickness, and weld from the inside face. The exterior finish is then ground and toned to match the existing patina. The splice is documented photographically before, during, and after. If the post itself is compromised, the repair includes post reinforcement rather than trusting a fresh weld to a failing member.
The gate goes quiet when the track is level, the wheels are true, and the motor is not fighting a misaligned rack. On Keller’s clay, track settlement is the usual culprit. We re-level the track bed with a compacted base, replace worn guide wheels, and re-mesh the rack to the pinion so the motor is not grinding. Then we run it through ten full cycles with you there to hear the result. The written record documents every change.
If your gate in Keller needs a technician who will hand you the price before work starts and leave you with the evidence afterward, call (817) 476-9945. A live person answers, day or night. Estimates are free, and we are proud of the work that carries our name.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, serving Keller and the surrounding Dallas-Fort Worth metro since 2014.