Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Southlake, TX
Gate access control in Southlake means something specific: keypads, intercoms, and card readers mounted to heavy ornamental iron gates on custom estates built between 1993 and 2012. The Blackland Prairie clay under this city shrinks and swells, pillars heave, and electronics wired into shifting masonry fail in ways you won’t see in Fort Worth or Grapevine. If your keypad stopped reading codes or your intercom lost power after a dry summer, call (817) 476-9945 and we’ll trace it the same day.
Why Southlake Homes Are Different
Southlake is one of the wealthiest cities in Texas, and its gate systems reflect that. Most homes went up between the mid-1990s and the early 2010s, which means the original operators on those gates are now fifteen to thirty years old. That’s the replacement cycle hitting right now. But the bigger factor is the soil. Expansive clay under Timarron, Carillon, and surrounding communities shrinks during summer drought and swells after spring rain, which shifts brick and limestone pillars by one to three inches over a few seasons. When a pillar leans, the gate leaf drags, the latch misses, and the limit switches get confused.
HOA covenants in Timarron and Carillon often specify exact gate materials and finishes, so a repair that works fine in Bedford can fail inspection here if the ironwork doesn’t match. We photograph what’s there before we touch anything, and we match finish and profile to the existing gate, not to whatever’s cheapest in the truck.
Our Main Southlake Services
Most calls we get from Southlake fall into three categories, and each one has its own page with full local pricing and details.
Gate Repair in Southlake
This covers the structural and mechanical side: gates that drag, latch failures, bent leaves, hinge wear, and pillar misalignment that keeps coming back. In Southlake, the recurring theme is clay movement under posts and pillars. We inspect the footing before we swap hardware, because replacing a hinge on a pillar that’s still moving doesn’t fix anything. See the full breakdown on our Gate Repair in Southlake page.
Gate Installation in Southlake
New gates here are measured jobs, not same-day ones. We order to your HOA’s finish spec, pour footings sized for Blackland Prairie soil, and schedule the operator separately so the gate hangs true before any automation goes on. For a complete walkthrough of what a custom install involves from first measure to final weld, visit our Gate Installation in Southlake page.
Gate Motor & Opener in Southlake
Most Southlake estate gates run on Viking, Elite, or LiftMaster operators, and these units sit in direct sun and then freeze every couple winters. We diagnose the board before we condemn the motor, and we leave a written record of every limit setting and current draw reading. That’s all on the Gate Motor & Opener in Southlake page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Southlake
Access control in Southlake is concentrated on estate entrances where keypads, intercoms, and card readers are mounted into brick or stone pillars that move with the clay. When the pillar shifts, wiring bundles inside can stretch, pinch, or pull loose at the terminals, and the symptom is usually a keypad that works intermittently or a call box that goes dead after heavy rain. We’ve traced more Southlake access failures to pillar movement than to failed components. That’s the difference between swapping a board and actually fixing the problem. The full scope of what we service is on our Gate Access Control page.
Keypad Entry
Signs you need it
The keypad accepts some codes but not others, works only in dry weather, or needs multiple presses before the gate responds.
What it costs in Southlake
Keypad replacement on a Southlake estate gate typically runs $280-$650 depending on whether we’re reusing existing wiring or pulling new cable through a settled pillar chase.
How we do it
We meter the existing wire for opens and shorts first, then either reuse it or pull new low-voltage cable, recess the new keypad into the existing cutout, and photograph the terminal block before and after.
Remote Control
Signs you need it
A remote that worked for years now only opens the gate from ten feet away, or one button stopped working while another still functions.
What it costs in Southlake
Transmitter replacement or reprogramming ranges from $95-$225 depending on whether the receiver is a standalone unit or integrated into a Viking or DoorKing control board.
How we do it
We test the receiver’s range with a known-good transmitter, reprogram to clear the old codes, and leave a written note of every remote we enrolled or deleted.
Video Intercom
Signs you need it
The camera feeds a black screen, audio works one way but not the other, or the call button rings inside but won’t release the gate.
What it costs in Southlake
Video intercom repair or camera replacement runs $350-$900 depending on whether the cable is intact or we’re replacing a corroded run underground.
How we do it
We check the camera at the gate first, then the indoor monitor, then the cable between them, and we replace only the failed leg while photographing each connection point.
What Gate Access Control Costs in Southlake
| Item | Typical range in Southlake |
|---|---|
| Keypad replacement | $280-$650 |
| Remote programming or replacement | $95-$225 |
| Video intercom repair | $350-$900 |
Can you fix my gate access the same day I call?
Yes, in most cases. We keep keypads, receivers, and common intercom parts on the truck, and a technician is in Southlake most weekdays. Call (817) 476-9945 before noon for the best chance at same-day service.
Why did my keypad stop working after heavy rain in Southlake?
Usually it’s water intrusion at the conduit where the cable enters the pillar, or a wire that pulled loose when the clay swelled after the storm. We’ll open the keypad, check the seal and the terminal connections, and show you photos of what we found before we replace anything.
Gate Parts & Welding in Southlake
Southlake’s gate hardware takes a beating from two directions: the clay that shifts pillars and the winter ice that freezes everything with a seal. Hinges wear oval, posts lean, rails crack at the welds, and iron sections rust from the inside out where the factory coating was scratched during the 1995-2005 building boom. Our Gate Parts & Welding service exists because most of these failures are repairable, not replaceable, as long as someone matches the metal and the finish correctly.
Hinge Replacement
Signs you need it
The gate leaf sags visibly at the latch end, or you hear a metal-on-metal pop when the gate swings.
What it costs in Southlake
Heavy ornamental hinge replacement runs $180-$450 per hinge depending on the size and whether we’re reusing the original mounting bosses or fabricating new ones.
How we do it
We unweight the leaf with a jack, cut or unbolt the old hinge, and weld or bolt a new assembly matched to the original profile and finish.
Custom Welding
Signs you need it
A picket is snapped, a scroll has separated, or the frame shows a hairline crack at a corner that grows each season.
What it costs in Southlake
On-gate crack repair and section welding runs $240-$800 depending on how much grinding, matching, and refinishing the repair area needs.
How we do it
We grind back to clean metal, weld the joint, dress the weld to profile, and match the finish so the repair doesn’t stand out against the original iron.
What Gate Parts & Welding Costs in Southlake
| Item | Typical range in Southlake |
|---|---|
| Hinge replacement | $180-$450 |
| Custom welding repair | $240-$800 |
| Gate wheel or roller set | $120-$250 |
Do you weld ornamental iron on site in Southlake?
Yes. We bring a mobile rig and weld in place so the gate never leaves your property. The repair area is ground, dressed, and finished to match the surrounding ironwork.
How much does it cost to weld a cracked gate in Southlake?
Most crack repairs run $240-$800 depending on the length of the crack and how much finish work the area needs. You’ll get the written price before we strike an arc, not after.
Brands We Service in Southlake
We service Ghost Controls, DoorKing, Elite, and Mighty Mule operators, and we carry common boards, remotes, and safety parts for those brands on the truck. Most Southlake repairs are done in one visit because we’re not waiting on parts. See our brands page for the full compatibility list.
Pricing for Gate Repair in Southlake, TX
| Service | Typical range in Southlake |
|---|---|
| Keypad replacement | $280-$650 |
| Remote programming or replacement | $95-$225 |
| Video intercom repair | $350-$900 |
| Hinge replacement | $180-$450 |
| Custom welding repair | $240-$800 |
| Gate wheel or roller set | $120-$250 |
| Post straightening or reinforcement | $300-$700 |
| Rail repair or replacement | $200-$600 |
Prices in Southlake run higher than the surrounding suburbs when the job involves matching ornamental ironwork to an HOA’s exact finish spec, or when a pillar has shifted and the footing needs attention before any hardware gets replaced. Every price is written and handed to you before any work starts, and the number on that sheet is the number you pay.
Neighborhoods We Serve in Southlake
We work throughout Southlake, including the gated and estate-heavy communities where gate issues cluster. Typical response for a repair call in this area is same-day or next-morning.
- Timarron
- Carillon
- Clariden Ranch
- Estes Park
- Shady Oaks
Service Area - Cities Near Southlake
We also run regular routes through the cities around Southlake for clients whose properties sit near the city line or who have multiple gates across the area. That includes Colleyville, TX, Grapevine, TX, Bedford, TX, and Euless, TX.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Southlake
Most Southlake repair calls are answered same-day or next-morning. A live person answers (817) 476-9945 around the clock, and we dispatch a technician based on the actual gate problem, not on a callback queue.
Depends on your community. Timarron and Carillon covenants often govern gate materials, colors, and finishes, so a like-for-like repair that matches the existing iron is usually the safe path. We can photograph and document the original gate before any work starts, which helps with any covenant questions.
We cover the whole city, from Timarron and Carillon through the estate lots along White Chapel and Southlake Boulevard. Dispatch and scheduling are coordinated from the Dallas-Fort Worth office, and the crews serving Southlake work locally.
That’s usually pillar shift from the clay soil, not a broken operator. Stop using the gate and call (817) 476-9945. We’ll inspect the footing and the hinge line before adjusting anything, because forcing the operator to move a drag-bound gate burns out motors fast.
Call (817) 476-9945 for a free estimate on gate access control, parts and welding, or any gate repair in Southlake. The price gets written down before the work starts, and you’ll have the photo record when we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Southlake Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.