Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Hurst
Gate repair in Hurst is most often a post problem, not a hinge problem. The black clay under most Hurst neighborhoods moves through wet-dry cycles that heave posts out of plumb, which is why a gate that swung cleanly in August catches the driveway by March. If your gate scrapes, sags, or won’t latch, the fix usually starts with a post reset in concrete, not a new set of hinges bolted to a post that’s already leaning. Our technicians work Hurst daily and arrive with the equipment to reset posts, realign frames, and get your gate closing properly again. Call (817) 476-9945 for a written price before any work starts.
Why Vance Gate Repair Fort Worth Is Hurst’s Preferred Gate Repair Company
Adrian Vance built this company on a documentation habit that Hurst homeowners benefit from directly: every visit leaves a written record of what was found, what was adjusted, and what was installed. No guessing, no re-diagnosing the same problem twice. The gates in Hurst’s post-war subdivisions are old enough now that most repairs involve multiple failure points, and we document all of them with photos before we leave.
Our business is founded on experience that started in commercial access control in 2014, with 22,000+ gates repaired and installed since then, every one with a written price before the job started and a documented record when the technician left. Hurst customers get the same treatment: a named, background-checked technician arrives in uniform, with a photo provided before arrival. And every job is covered by the 365-Day Done Right Promise. If the repair isn’t right, we make it right. No argument, no fee, within one full year.
Scheduling for Hurst is coordinated from our Dallas-Fort Worth office, with crews dispatched locally. A live person answers the phone 24/7, so when a gate drops off its hinges at 9 p.m. on a Sunday in a neighborhood off Precinct Line Road, you talk to a person, not a voicemail loop.
Our Gate Repair Services in Hurst
Hurst’s housing stock is dominated by ranch-style homes built from the late 1950s through the 1980s, which means most driveways have a wood privacy fence and a swing gate on a modestly sized lot. That uniform build era drives the bulk of our work in the city. Here are the repairs we handle most often in Hurst.
Hinge & Post Repair
Hurst’s Blackland Prairie clay expands after rain and shrinks during dry spells, and over decades that movement walks gate posts out of vertical. A hinge replacement on a drifted post won’t hold. We reset posts in concrete below the clay active zone, then hang fresh hardware on something that will actually stay put. This is the most common repair we perform in Hurst, and the one that homeowners often attempt twice before calling us.
Gate Realignment
A gate that scrapes the driveway or misses the latch by half an inch is usually a structural problem, not a hardware problem. We measure the frame, identify where the post moved, and realign the gate so it swings true. On Hurst’s narrow ranch driveways, even a small misalignment binds the gate against the fence or the house, and often trips the safety photocell on an automatic opener.
Electric Gate Repair
Electric gate repair in Hurst covers a lot of ground: failed motors, misaligned photo-eyes, dead control boards, and wiring damaged by freeze-thaw cycles. Winter Storm Uri in February 2021 killed a wave of gate openers across Hurst, and we’re still replacing and repairing motors damaged by that event. We service nine major automation brands, including Linear, Viking, Ghost Controls, and DoorKing, so we work on whatever motor is already on the property rather than steering you toward a replacement.
Automatic Gate Repair
When an automatic gate in Hurst won’t open or close fully, the cause is often a combination of a moved post and a limit switch that’s now out of tolerance. A photo-eye (the infrared beam that stops the gate if something crosses the path) misaligned by even two inches will hold the gate open or refuse to close it. We check the full system, from the motor mounts to the safety edges, and we photograph every adjustment we make.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hurst
Most gate companies push the brand they sell. We fix the brand you already have. Our technicians service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Hurst customers, that means no multi-week wait while a tech “checks with the manufacturer.” We stock common parts for the brands we see most often in Hurst subdivisions, including Viking and Linear motors, and we can usually complete a motor swap or board replacement in a single visit.
Common Gate Repair Problems We See in Hurst Homes
- Post lean from clay soil movement. Hurst sits on expansive Blackland Prairie clay that swells after rain and shrinks in drought. Over a full seasonal cycle, posts can move several inches, and by the time the latch misses the strike plate, the post has usually been drifting for years. Resetting the post is the only durable fix.
- Gates that bind against the house or fence. Original swing gates on narrow ranch-house driveways have limited clearance. When the hinge post shifts even slightly, the gate edge catches the house siding or the fence picket, and every cycle adds strain to the hinges and the opener.
- Shared driveway gate failures. Hurst’s older subdivisions have a lot of shared driveways and rights of way. When one post on a shared gate shifts, the gate goes out of square and trips the safety photocell. We coordinate with both property owners and keep the pedestrian access working while we work.
- Opener failures after freeze-thaw events. North Texas ice storms, including Uri, put extreme stress on gate motors and their mounts. We see cracked motor housings, stripped gears, and control boards that fail months after the freeze when corrosion finally reaches the circuits.
Pricing for Gate Repair in Hurst, TX
You get a written price before any work starts, every time. Here’s what gate repair in Hurst typically costs, based on the work we perform most often here:
- Hinge replacement on a wood privacy gate: $180-$320, depending on the hinge weight and whether the jamb is sound.
- Gate post reset in concrete (including new footing below the clay line): $350-$650 per post.
- Full gate realignment with hardware adjustment: $200-$450, depending on frame condition and post movement.
- Electric gate motor replacement: $650-$1,400, depending on brand and whether the arm bracket and mounts are intact.
- Safety photocell replacement or realignment: $120-$250.
These are the ranges we quote most often in Hurst. Your written price is based on what we find when we arrive, not on a phone estimate with padding built in. You agree to the number before we pick up a tool. That’s Haven Standard Clause 1, and it applies to every job we do here.
We Also Serve Cities Near Hurst
Our Gate Repair team covers more than just Hurst proper. We serve North Richland Hills, Bedford, Colleyville, and Haltom City from the same dispatch desk, with the same written pricing and documentation standard. If you’re in a neighboring city and your gate is down, the same crew that works Hurst can be on the way.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Hurst
Hurst is built almost entirely on Blackland Prairie clay, and the city’s housing stock sits on slab foundations and fence lines laid decades ago, before post footings were designed to resist expansive soil movement. Bedford and Euless have some of the same clay, but Hurst’s dense 1960s-to-1980s build-out means more fences and gates sitting on posts that were never isolated from the active soil zone. The fix is a deeper footing, not a bigger hinge.
Yes, and it’s one of the most common calls we get in Hurst. The clay under your gate swells when it rains, pushing the post up and out of plumb by a quarter inch or more. When the clay dries out, the post doesn’t always settle back to the same position. If your gate sticks only after rain, call us at (817) 476-9945 and we’ll measure the post movement and tell you whether a reset is needed. The estimate is free.
Sometimes. Hurst ranch homes often have driveways too short for a full slide gate conversion without significant concrete work, but a compact slide gate or a repositioned swing gate is often possible. We’ll measure the driveway, the setback, and the post locations, and give you a written price for the conversion or the reconfiguration before any work starts.
Most often, the control board fails or the motor’s internal gears strip when the gate is frozen in place and the opener keeps trying to move it. We also see moisture intrusion that corrodes connections months after the freeze. We diagnose the exact failure, show you the part we’re replacing, and leave a photo record of the repair. Most motor replacements in Hurst run $650-$1,400, and we can usually complete them in one visit.
Yes. Any automated gate in Hurst should have functioning safety edges or photo-eyes that stop the gate if a person, pet, or vehicle is in its path. We test entrapment protection on every automatic gate repair and include the readings in your documented record. If a photo-eye is misaligned or a safety edge is worn, we’ll quote the replacement in writing before we touch it.
If your gate is down, sagging, or throwing the same error code every morning, call (817) 476-9945. You’ll talk to a person, get a straight answer, and receive a written price before any work starts. That’s how we do gate repair in Hurst.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, serving Hurst since 2014.