Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Arlington
A gate installation in Arlington typically costs between $2,800 and $9,500 for a complete automated driveway gate, depending on whether you’re starting from scratch or replacing an existing system. Most standard single swing gates with a basic operator run $2,800-$4,800, while custom ornamental iron double gates with premium automation land between $6,000 and $9,500. We schedule Arlington installations within 5-7 business days for standard work, and we always hand you a written price before any tool leaves the truck. Call (817) 476-9945 and you’ll talk to a live person, not a voicemail tree.
We know Arlington gates differently than a general fence company does. The clay under your driveway moves. The HOA has a say in what your gate looks like. And the builder who put in that 1998 swing gate probably used a footing that was never deep enough to survive twenty-five years of Arlington’s shrink-swell cycle. We account for all of that before we order a single part.
Why Vance Gate Repair Fort Worth Is Arlington’s Preferred Gate Installation Company
We’ve installed and repaired gates throughout Arlington long enough to know the neighborhoods: the master-planned subdivisions along Sublett Road, the established communities off Green Oaks Boulevard, the newer developments pushing toward Kennedale, and the older lots near Lake Arlington where mature trees make gate placement interesting. Every installation starts with a site assessment that includes soil conditions, existing conduit, and the HOA’s architectural guidelines. That’s not a sales pitch. It’s the only way to install a gate in Arlington that doesn’t shift five degrees the first summer.
Adrian Vance started this company in 2014 after years in commercial access control, and the habit stuck: document everything. When we survey an Arlington property, you get photos of the existing post lean, the footing condition if it’s exposed, the operator wiring, and the concrete pad. That photo record becomes part of your job file and comes to you before we quote. Most Arlington customers tell us they called us because another company gave them a verbal number and a handshake. We hand over a written scope and a written price under Clause 1 of our Haven Standard. Nothing starts until you approve it in writing.
Our Arlington dispatches come from the Dallas-Fort Worth office, and we keep crews routed through Arlington every business day. A background-checked, uniformed technician arrives with their name and photo sent to you ahead of time. The 365-Day Done Right Promise applies to every Arlington installation: if something isn’t right within a full year, we fix it. No argument. No fee.
Our Gate Installation Services in Arlington
We install all configurations, but these four cover the overwhelming majority of Arlington properties. Each one gets local treatment: the right footing depth, the right operator sizing, and a documented record when we leave.
Driveway Gate
Arlington’s housing stock leans heavily toward suburban tract homes with wide driveways, and the most common request is a full double-swing driveway gate in ornamental iron or powder-coated steel. HOA communities along Highway 360 and Sublett Road typically require wrought-iron styling with a specific powder coat color, so we pull the architectural standards before we order materials. A driveway gate installation in Arlington includes the posts set below the active clay zone, hinges rated for the full gate weight, and an operator sized for Arlington’s heat, not for a mild climate.
Pedestrian Gate
A pedestrian gate in Arlington usually sits beside the driveway gate or replaces a wood fence gate on a side yard. These gates are lighter, but they still sit on the same expansive clay, so we set them on footings that extend below the clay’s movement zone and use adjustable hinges so the gate can be trued up after its first full year of seasonal movement. We also handle pedestrian gate automation for Arlington homeowners who want keypad or intercom access without walking out to the gate.
Sliding Gate
Sliding gates are a smart choice for Arlington properties with sloped approaches or back-to-back driveways where a swing gate would sweep into the neighbor’s yard. The catch with a slide gate on Arlington soil: the track and operator pad have to be built on a stable base, or the clay movement will bind the rack and pinion within a few seasons. We pour the operator pad with rebar-reinforced concrete and set the track on a properly compacted sub-base. If the existing slide gate has a post that’s rotated out of plumb, we fix that before hanging a new motor. Our crews have done exactly this in subdivisions along Sublett Road where late-1990s posts have shifted four degrees.
Swing Gate
The swing gate remains the most popular choice in Arlington’s HOA communities. Single and double configurations both work, and we match the gate material and finish to the community’s architectural standards. The operator brackets, arm geometry, and hinge spacing all get a documented photo record before we consider the install complete. On Arlington’s clay, a swing gate post that isn’t plumb will bind the operator arm within a year, so we treat post alignment as a mandatory part of the job, not an optional extra.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Arlington
We work on whatever motor is already on your property, and we install operators from the brands Arlington homeowners already know: LiftMaster for heavy residential double gates, Viking and DoorKing where a gate sees heavy cycle counts, and Ghost Controls where a homeowner wants clean, app-based control on a smaller single gate. We don’t push a replacement just to match our inventory. If your existing operator is a builder-grade unit from a brand we service, we’ll tell you plainly whether repair makes sense or whether an upgrade is the honest call. Parts for common Arlington installations are kept stocked at our Dallas-Fort Worth office so we’re not waiting a week on a shipment.
Common Gate Installation Problems We See in Arlington Homes
- Posts rotated out of plumb from clay heave. Arlington sits on Blackland Prairie clay. When it dries out in August, it shrinks and cracks. When spring rains come, it swells. Posts set shallow shift three to five degrees, and the operator arm binds. The fix is a deeper footing below the active clay zone, not just a new motor.
- Builder-grade operators that were undersized from day one. Arlington’s late-1990s and early-2000s HOA boom put a lot of cheap operators on heavy ornamental iron gates. Twenty years of Arlington heat and binding has burned out many of them. We size the replacement for the actual gate weight and the local climate.
- No dedicated conduit run during construction. Many Arlington homes built in the 1980s-2000s never got a proper conduit for gate wiring. Builders ran surface-mounted wire or buried it at six inches without a sleeve. Clay movement cracks that wire. We run dedicated conduit, usually three-quarter inch PVC, for power, keypad, and loop detector wiring.
- HOA aesthetic requirements that limit material choices. Arlington has a dense concentration of HOA-governed communities, and most architectural committees require ornamental iron or specific powder-coated steel finishes. Substituting a cheaper material after a failure draws a correction letter. We pull the community standards before we order, so the gate matches on day one and stays compliant.
Pricing for Gate Installation in Arlington, TX
Here’s what Arlington homeowners can expect to pay for a gate installation, based on what we’ve quoted and installed across the city:
- Manual ornamental iron single swing gate, 10-12 feet: $900-$1,800 installed
- Automated single swing gate with LiftMaster or Ghost Controls operator: $2,800-$4,600 installed
- Automated double swing gate with heavy-duty operator and full safety package: $4,800-$7,800 installed
- Sliding gate with track, operator, and keypad: $4,200-$8,000 installed depending on gate length and material
- Pedestrian gate with automation and intercom/keypad: $1,400-$2,800 installed
These ranges reflect the typical Arlington job, including deeper footings for clay soil and conduit runs to code. The written price you approve before work starts is the price you pay. We don’t hand you an invoice that’s higher than the quote. Every Arlington installation includes a documented photo record of what we found, what we set, and what we installed under Haven Standard Clause 4. Call (817) 476-9945 and we’ll schedule a free on-site assessment with a written estimate.
We Also Serve Cities Near Arlington
Beyond Arlington, our crews regularly handle Gate Installation work in Kennedale, Burleson, Grand Prairie, and Fort Worth. If you’re a few miles outside the city line, call us. The same Haven Standard applies everywhere we work: written price before the job starts and a photo record when we leave. Our Gate Installation in Arlington customers refer us to friends in neighboring cities constantly, because the clay doesn’t stop at the municipal boundary.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Arlington
Arlington’s HOA communities were largely built during the 1980s-2000s boom, and many of those original gate operators were builder-grade units sized for a mild climate and a gate that never shifted. Two decades of Arlington’s extreme summer heat and clay-driven post movement have overloaded those motors and burned them out. The gate post rotates, the arm binds, and the operator pulls more amperage than it’s rated for. Replacing just the motor without fixing the post means you’ll replace the motor again. We address both in one job. Call (817) 476-9945 for an assessment and a written price.
Yes, in most cases, and Arlington homeowners do it often when they want keypad entry, intercom access, or vehicle exit without getting out of the car. The gate itself is usually fine. The work is in the operator, the safety edges, the conduit run, and a proper footing or reinforcement if the posts have shifted. We quote the automation separately from the gate, so you see exactly what each part costs before you approve the job.
A proper Arlington gate installation needs a dedicated three-quarter-inch PVC conduit run from the panel to the operator, a separate conduit for low-voltage wiring (keypad, safety edges, loop detector), and a GFCI-protected circuit rated for the operator’s amperage draw. We bury conduit at eighteen inches minimum below grade, below the active clay movement zone, and we sleeve all wiring. Many Arlington homes built before the mid-2000s never had this run, so it’s part of the job, not a surprise line item.
Yes, but the base matters more than the gate itself. We compact the sub-base under the track, pour a reinforced concrete operator pad with rebar, and anchor the track so clay movement doesn’t warp it. The gate frame is welded steel, not thin tube, because Arlington soil movement flexes lighter frames. If you have a slope or a short setback, a slide gate is often the better option than a swing gate. Call us for a free site assessment, and we’ll give you a written price based on what we actually find on your lot.
Federal safety standards for automatic gate operators require entrapment protection, and we install it on every automated gate in Arlington: photo-eye sensors that stop and reverse the gate if anything crosses the beam, safety edges on the leading edges, and warning signage. We calibrate the limits and test the reversal under load before we call the job done. The photo-eye misalignment is one of the most common service calls we run in Arlington, and we always photograph the final settings so the record is on file.
Call Vance Gate Repair Fort Worth for Gate Installation in Arlington
If you’re in Arlington and you need a new gate, an automated upgrade, or a second opinion on a quote from another company, call (817) 476-9945. A live person answers any time, day or night. We’ll schedule a free on-site assessment, measure what’s there, check the soil and the HOA standards, and hand you a written scope with a written price before any work starts. No verbal estimates. No surprise invoice. Just a gate that’s sized for Arlington’s clay, Arlington’s heat, and the way your family actually uses the driveway.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, serving Arlington with written pricing and documented gate installations since 2014.
Gate Installation in Nearby Areas
