Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Benbrook
Gate installation in Benbrook usually runs between $2,400 and $9,800 depending on the gate type, material, and operator you choose. A basic single swing driveway gate with a chain-driven operator starts around $2,400, while a custom double swing security gate with steel infill panels and a commercial-grade operator lands between $6,500 and $9,800. We quote every Benbrook job in writing before any work starts, and our crews know the clay soil, lake wind, and 1970s-era gate hardware that show up constantly on properties here. Call (817) 476-9945 and we’ll schedule a free site measure and written estimate.
Why Vance Gate Repair Fort Worth Is Benbrook’s Preferred Gate Installation Company
Benbrook’s gate work is different from what we see twenty minutes east in Fort Worth. The acreage lots off Winscott Road, the ranch-style homes along Timber Creek, and the properties backing up to Corps land all share one trait: the gates are bigger, the posts are older, and the clay underfoot moves more than anything you’ll find in a tighter subdivision. Our Gate Installation team has pulled and re-set more tilted hinge posts in Benbrook clay than we can count, and we document every footing depth with photos before the concrete goes in.
Adrian Vance started this work in 2014 doing commercial access control, where a gate that fails means a secured perimeter that isn’t secured. That documentation habit carried over. When we install a gate in Benbrook, you get a written scope, a written price, and a photo record of what we found, what we set, and what we installed. No guesswork, no verbal handshake pricing. Under Haven Standard Clause 1, the price is in your hand before anyone picks up a tool.
Benbrook homeowners call us because the person who answers the phone can actually tell you what a floating post is and why your gate stopped halfway open after last week’s rain. We don’t route you through a call center. A live person answers 24/7, and our Benbrook dispatches come from the brand’s Dallas-Fort Worth office with local crews who know the roads out here.
Our Gate Installation Services in Benbrook
Driveway Gate Installation
Driveway gates in Benbrook skew toward heavier steel and ornamental iron than the aluminum panels you see in denser Fort Worth suburbs. The semi-rural lots along the Lake Benbrook corridor demand a gate that reads as a boundary, not a suggestion. We install single and double driveway gates with operators sized for the wind load a solid infill gate catches during spring storm season. Post footings get drilled to depth for Benbrook’s Fort Worth Prairie clay, not a generic 36-inch hole that heaves after the first wet season.
Swing Gate Installation
Swing gates are the most common gate type on Benbrook acreage, and the most vulnerable to clay movement. When saturated ground swells and tilts a hinge post by even a degree and a half, an automatic operator’s obstruction detection can trigger and leave the gate stuck open. We install swing gates with footings deep enough to resist that movement, and we photograph the plumb reading on every post before and after concrete. On properties near Lake Benbrook where the clay cycles hard between drought shrink and rain heave, we often recommend a heavier post wall than the minimum spec.
Security Gate Installation
Benbrook’s boundary with Corps of Engineers land around Lake Benbrook changes what “security gate” means. Homeowners whose property abuts publicly accessible Corps land don’t just want a gate that looks solid; they want one that stays closed and controlled. We install security gates with keypad entry, vehicle loop detectors, and operators that hold position under wind. A gate that blows open during a storm isn’t security. We size operators for the full panel area, not just the gate weight, because wind load on a solid steel gate near the lake is a real force.
Sliding Gate Installation
Sliding gates make sense on Benbrook lots with sloping driveways or limited swing room near the house. They also handle wind better than a wide swing leaf, which matters on exposed acreage. We install cantilever and track-style slide gates with proper rail footing and operator pads. Hail denting on lighter aluminum slide panels is a spring reality here, so we steer Benbrook customers toward panel thicknesses that survive a North Texas storm without rack misalignment.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Benbrook
We work on whatever motor is already on your property. LiftMaster is the most common brand we install new in Benbrook, but we also service and install Ghost Controls, DoorKing, Elite, and Mighty Mule systems. That matters because you shouldn’t have to replace a perfectly good operator just because the last company only worked on one brand. Nine major automation brands, one service call. We stock common parts for these operators locally, which means faster turnaround when your Benbrook gate needs a board, a limit switch, or a photocell pair.
Common Gate Installation Problems We See in Benbrook Homes
- Floating posts from clay heave: Benbrook’s Fort Worth Prairie clay swells after spring rains and tilts hinge posts enough to trigger the obstruction-detection safety stop. The gate sticks open, the operator isn’t actually dead, and the fix is post re-plumbing plus a deeper footing.
- Hail-damaged aluminum panels: North Texas hail dents and warps lighter aluminum gate panels, throwing rack and pinion alignment off on slide gates. Panel replacement usually has to happen before operator realignment.
- Shallow footings on 1970s and 1980s gates: Many original Benbrook gate posts were set at depths that predate modern understanding of expansive clay movement. A gate that worked for thirty years suddenly won’t stay aligned because the footing was never deep enough for this soil.
- Wind shear on solid infill swing gates: High wind loads during severe storms shear hinge post welds on solid gates, particularly where the original post footing was poured too shallow. We re-plumb the post and re-weld with the gate braced, then photograph the finished weld for your record.
Pricing for Gate Installation in Benbrook, TX
Here are the ranges we quote for Gate Installation in Benbrook, based on jobs we’ve completed in this market:
- Single swing driveway gate with chain operator (steel or ornamental iron): $2,400 - $4,200
- Double swing driveway gate with belt-driven operator: $4,800 - $7,500
- Custom double security gate with steel infill and commercial operator: $6,500 - $9,800
- Sliding gate (cantilever or track) with operator: $3,800 - $7,200
- Pedestrian walk gate with keypad: $900 - $2,100
What moves the price: gate width and height, steel gauge, infill style (solid steel holds more wind than pickets), operator brand and duty cycle, keypad or intercom, and whether we’re drilling through Fort Worth Prairie clay or hitting rock. Every quote is written and handed to you before work starts. Call (817) 476-9945 for a free measure and exact price.
We Also Serve Cities Near Benbrook
Our Benbrook crews also cover gate installation in Benbrook and the surrounding communities including Fort Worth, Haltom City, Saginaw, and White Settlement. If you’re just outside Benbrook, call (817) 476-9945 and we’ll confirm coverage and schedule a free site visit.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Benbrook
A swing gate post footing in Benbrook’s expansive Fort Worth Prairie clay should be drilled to a minimum of 36 to 42 inches below grade and bell-bottomed where possible, with a 12-inch minimum diameter. The goal is to get the footing below the active zone that shrinks and swells with moisture. On Lake Benbrook shoreline properties where the clay cycles hardest, we typically go 42 inches and add rebar. Call (817) 476-9945 and we’ll assess your specific property before recommending a footing depth.
Every automatic gate operator has a manual release mechanism, usually a keyed bypass or a pull handle near the motor. Disengage the operator first so the gate moves freely, then push the gate slowly from the lead edge. Never force a gate that resists; if it won’t budge, the drive chain or rack may still be engaged. We show every Benbrook customer how to use their manual release during the walkthrough, and we leave a laminated instruction card on the post. If you need help identifying your release, call (817) 476-9945.
Yes. A photo-eye, the infrared beam that stops the gate if something crosses the path, is required on any automatic gate installation under current safety standards, and it’s non-negotiable on our jobs. UL 325 compliance requires both a primary and secondary entrapment protection device. On Benbrook clay where a gate can misalign and stop unpredictably, a properly mounted photocell pair also prevents false obstruction trips when posts shift slightly. We install and photograph every photocell alignment before we leave.
That’s almost always a floating post. After heavy rain, Benbrook’s clay swells and tilts the hinge post just enough to change the gate’s travel arc. The operator’s obstruction detection reads that added resistance as something in the path and stops the gate halfway. The operator usually isn’t broken. The fix is post re-plumbing and a deeper footing, then operator realignment. We see this pattern constantly on properties near the lake. Call (817) 476-9945 and we’ll diagnose it rather than selling you a motor you don’t need.
Yes, and it’s common on the larger Benbrook lots where running a dedicated electrical line to the gate is costly. Solar-ready operators from brands like Ghost Controls and Mighty Mule work on gates that get direct sun, but panel sizing matters. A shaded gate or a heavy steel double swing will drain a small panel fast. We walk every Benbrook customer through panel wattage, battery capacity, and winter sun angles before recommending solar versus a grid run. Call (817) 476-9945 for a free site check.
Get a Written Quote for Your Benbrook Gate
Before anyone digs a footing or hangs a hinge, you’ll have the price in writing. That’s how we’ve done every gate job since 2014, and it’s the only way we work. Call (817) 476-9945 any time; a live person answers. We’ll schedule a free measure at your Benbrook property, assess your soil and wind exposure, and hand you a written scope with a written price. No verbal estimates, no surprise invoices, just a gate that works and a record of everything we did to put it in.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, offering Gate Repair - Benbrook since 2014.