Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
A new automatic driveway gate in Keller typically runs $4,800 to $14,500 installed, depending on whether you need a single swing gate, a double gate, or a sliding gate on a track. Most custom ornamental iron work in Keller takes 3 to 6 weeks from template to final install, and we quote the price in writing before any steel gets ordered. If you live east of Keller-Smithfield Road or north of Keller Parkway and you’re tired of waiting for a callback, call (817) 476-9945 and you’ll get a person, not a voicemail.
What makes gate installation in Keller different from gate work in, say, North Richland Hills or Colleyville? Three things: the soil, the lot sizes, and the age of the gates already on those lots. We’ll get into all three below, because they change how a gate needs to be set, what operator belongs on it, and why some installers get it wrong the first time.
Why Vance Gate Repair Fort Worth Is Keller’s Preferred Gate Installation Company
We service more estate communities along Keller Parkway and Bear Creek Parkway than most companies in Tarrant County, and our crews know what they’re walking into before the truck parks. Keller is not a one-size-fits-all market. A half-acre lot off Rufe Snow Drive with a 1998 ornamental double gate needs different work than a newer custom home in Hidden Lakes with a modern aluminum sliding gate. We name what we found on every visit, photograph it, and hand you the record before we leave.
Adrian Vance started this company in 2014 from commercial access-control work, and that background shows up in the documentation we leave on every Keller job: wiring diagrams, limit-switch readings, hinge-load measurements, and a written record of every part number installed. Under Clause 4 of our Haven Standard (Evidence on every job), the photo log and written scope come with the job at no additional charge. Under Clause 1 (Have it in writing), the flat price is written and handed over before any tool comes off the truck.
Keller homeowners call us because they researched the problem before picking up the phone. They’ve read the three-star reviews on other companies and they know what a sagging ornamental gate looks like at year six. We don’t ask for trust; we hand over evidence.
Our Gate Installation Services in Keller
The gate itself is the easy part. The footing, the operator, the safety circuit, and the hinge engineering are what determine whether the gate still works in five years. In Keller’s soil, getting those details wrong costs more than the gate itself. Here’s what we install across the city, from Gate Installation projects at the entry to custom work inside the property.
Driveway Gate Installation in Keller
Most Keller driveway gates are ornamental iron, custom-fabricated to match the house. These are not the hollow tubular gates you see in production neighborhoods. They’re heavy, and that weight concentrates on the hinge post. We set driveway gate hinge posts in over-excavated footings with the post wrapped against direct clay contact, because a post that moves a quarter inch in Keller’s black gumbo means a gate that drags at the latch within two seasons. Price range for a single ornamental driveway gate: $4,800 to $8,900 installed, including operator-ready hinge reinforcement.
Double Gate Installation in Keller
Double swing gates are the standard for Keller’s estate driveways, especially on half-acre-plus lots where a wide drive meets the street. The failure point is almost never the panels; it’s the hinge post footing and the center stop. We undercut the footings below the drought-shrink zone and run helical piers when the soil survey calls for it, then hang the gates with zero sag correction needed on day one. A custom double ornamental gate in Keller typically runs $8,500 to $14,500 installed, with the spread driven by panel weight, automation, and whether you need new brick or stone columns built.
Sliding Gate Installation in Keller
Sliding gates make sense on Keller properties where a driveway slopes up from the street or where a swing gate would conflict with a sidewalk. The track is the job. On black gumbo, a track bed poured without proper base compaction will settle unevenly, and the gate will bind. We set sliding gate tracks on compacted base with the rail anchored to grade beams that don’t move with the clay’s shrink-swell cycle. Sliding gate installs in Keller run $5,200 to $11,800 depending on gate length and whether the operator is rack-and-pinion or chain-drive.
Pedestrian Gate Installation in Keller
Many Keller estates have a separate pedestrian gate beside the vehicle gate, and it gets more cycles daily than the driveway gate ever will. If the pedestrian gate hangs on the same post as the driveway gate, that post needs to be engineered for double the load. We see this missed constantly. A welded steel or ornamental pedestrian gate in Keller with its own operator and access keypad runs $1,900 to $4,200 installed. Small job, common failure point when the footing is shared.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Keller
Keller’s 1990s and 2000s estate communities spec’d a lot of Viking and Linear operators, and many of those units are now discontinued with parts getting scarce. We keep retrofit kits on hand specifically for those units because Keller’s owner-occupancy rate is high and most residents have lived with the same gate system for 20 years. They want it repaired, not replaced. Beyond Viking and Linear, we also install and service DoorKing and Ghost Controls operators, among the nine major brands our techs handle. If the motor on your property still works, we build the new gate around it. If it’s done, we’ll show you what failed and quote the replacement in writing before anything is ordered.
Common Gate Installation Problems We See in Keller Homes
- Footings poured straight into black gumbo without a moisture barrier. The clay shrinks during Keller’s long summer droughts and heaves in the wet winter, tilting the post out of plumb within a year. We over-excavate and wrap the concrete against direct clay contact, and use helical piers when the soil warrants it.
- Ornate gates hung on undersized hinge posts. A 400-pound ornamental gate concentrates its weight at the hinge post, not the middle of the panel. When the post deflects, the gate sags at the latch side. Panel-only repair guarantees a callback. We size the post for the panel weight plus the operator load.
- Suburban installers skipping UL 325 entrapment protection. A large custom gate without photo-eyes or edge sensors is a safety liability, and Keller HOAs have flagged installs that fail inspection. We wire photo-eyes and safety edges as standard on every automatic gate, no exceptions.
- Ice-storm seizure on exposed chain and screw-drive operators. North Texas ice storms hit Keller hard enough to seize ground-level operator mechanisms. We spec enclosed gear-drive or chain-protected operators on Keller installs where the drive sits low or exposed, and we photograph the housing to document the choice.
Pricing for Gate Installation in Keller, TX
You won’t get a “call for quote” from us. The price gets written down before the job starts. Here are real ranges for Keller, reflecting the heavier custom work common in this city:
- Single ornamental driveway swing gate, installed: $4,800-$8,900
- Custom double swing gate with new hinge posts: $8,500-$14,500
- Sliding gate on compacted track, automated: $5,200-$11,800
- Pedestrian gate with keypad operator: $1,900-$4,200
- New operator retrofit on existing gate (any major brand): $1,300-$2,800
What moves the number: panel weight, whether we’re building new columns or reusing existing ones, operator brand and safety devices, and whether the footing needs helical piers because of the clay. Every price is quoted and agreed before any work starts. No exceptions, and that’s Clause 1 of our Haven Standard, in writing. Call (817) 476-9945 and we’ll schedule a free measure and hand you a written number. While we serve Gate Installation in Keller, these prices reflect the heavier custom work and clay-soil footing requirements specific to the area.
We Also Serve Cities Near Keller
Our Keller crews regularly take work in North Richland Hills, Southlake, Haltom City, and Colleyville. The soil changes as you move west toward Southlake and the gate styles shift with the housing stock, but the standard is the same: written price, documented work, and a gate that stays plumb.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Keller
In Keller’s black gumbo, gate post footings need to go a minimum of 36 to 42 inches deep, below the typical drought-shrink and frost-heave zone, and the concrete should be wrapped or sleeved so the clay can’t grip the pour and lift it during a wet winter. For heavy ornamental double gates, we often drill deeper and set helical piers that anchor into stable clay below the movement zone. A footing that only goes 24 inches will move. We’ve seen it. Call (817) 476-9945 for a soil-specific quote on your lot.
Yes, in most Keller HOA communities with perimeter access gates or architectural-review committees, a new automatic gate requires HOA architectural-review approval before any visible component changes, and some HOAs have specific rules about gate height, color, and operator placement. We document every spec in writing so you have what the review board asks for, and we adjust the plan to HOA requirements without charging you for the revision. If you bring us a written denial from a previous installer’s plan, we’ll review it and rework the scope at no cost.
Yes. If your Viking or Linear operator is discontinued or seized, we can commonly retrofit a new LiftMaster, DoorKing, or other current-model operator onto the existing gate and hinges, keeping the original ornamental work. Keller has a concentration of these orphaned Viking and Linear units from the late-1990s and 2000s estate builds, so our techs keep retrofit kits in stock specifically for them. We’ll show you the failed component, photograph the new setup, and quote the retrofit in writing before any parts are ordered. Call (817) 476-9945 for a free estimate.
Only if it’s a sealed, watertight underground operator housing rated for full submersion, not a standard above-ground box buried in a plastic tub. Keller’s ice storms can snap ground-level chain drives and freeze exposed screw mechanisms, while the summer heat bakes the soil around an underground box and can cook an unvented motor. We spec enclosed underground operators with drainage and thermal vents, and we document the housing install with photos before backfill. The price difference is real, and so is the failure rate difference.
The sag prevention happens before the gate goes up: over-excavate the hinge post footing, sleeve the concrete against the clay, size the hinge post for the panel weight plus operator load, and set the post with zero deflection at install. We also build a welded steel sub-frame inside the ornamental panel so the gate carries its own weight instead of relying on the pickets. Our crew recently set a custom ornamental iron double swing gate on a half-acre lot off Bear Creek Parkway where the owner’s 2003 Viking operator had seized. We poured new hinge post footings with helical piers down to stable clay, hung the gate with zero sag correction needed, and paired a new LiftMaster operator with a matched intercom-camera and in-ground loop detector. The gate cycles silently and stays plumb through the next wet winter.
Call Vance Gate Repair Fort Worth for Gate Installation in Keller
If you live in Keller and you’re planning a new gate, or you’re tired of a gate that’s sagging, binding, or dead at the post, call (817) 476-9945. A live person answers at any hour. We’ll schedule a free measure, hand you a written price before any work starts, and leave you with a documented photo record of everything we installed. That’s how we’ve done it since 2014, and that’s the standard every Keller gate deserves.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, serving Keller since 2014.
Gate Installation in Nearby Areas