Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Haltom City, TX
Gate access control in Haltom City usually means upgrading an older swing gate or slide gate so it opens by keypad, remote, phone, or card instead of by hand. Most of the gates we work on here were installed decades ago on homes built between 1950 and 1975, and the work usually starts with getting the gate itself moving reliably before adding control hardware. If your gate binds, sags, or fights the opener, call us at (817) 476-9945 and we’ll give you a written price before anything gets touched.
Why Haltom City Homes Are Different
Haltom City’s neighborhoods were built out almost entirely during the 1950s through 1970s working-class housing boom, which means a dense inventory of chain-link and ornamental iron gates set with minimal concrete. The bigger issue is what that concrete sits in: Tarrant County’s black expansive clay. It contracts hard through long North Texas summers, then swells after spring rains. That shrink-swell cycle torques gate posts out of plumb year after year, and the result is chronic gate sag across the older east and north side streets in a way newer engineered-fill suburbs don’t experience at the same scale. The corridor of auto shops and machine shops along Denton Highway and Airport Freeway adds another layer: Haltom City has a noticeably high share of commercial slide gates, many running 1990s-era operators that are now at end of life. Wood-post privacy gates are everywhere too, and the same moisture-retaining clay accelerates rot at ground level, so post replacement is a recurring call here.
Our Main Haltom City Services
Most Haltom City homeowners reach out for one of three things: a gate that won’t close right, a new gate, or a motor that quit. Here’s how each one works here.
Gate Repair in Haltom City
Repair calls in Haltom City usually start with a sagging gate. The post has moved in the clay, the hinge side has dropped, and the latch no longer lines up. We reset or replace the post, rehang the gate, and photograph the final position so you can see what changed. Full details are on the Gate Repair in Haltom City page.
Gate Installation in Haltom City
New gate installations here have to account for the soil. We size footings for expansive clay, set posts deeper than the original work, and spec hardware that holds up to the movement. Whether it’s a chain-link swing gate or ornamental iron, the written quote covers the whole job. See Gate Installation in Haltom City for the full breakdown.
Gate Motor & Opener in Haltom City
When a motor stops mid-travel or the gate reverses for no reason, the limits, photo-eyes, or the arm bracket are usually involved. Haltom City’s ice storms add a seasonal spike in calls by bending frames and snapping latch hardware on gates already stressed from post movement. Read more on the Gate Motor & Opener in Haltom City page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Haltom City
Gate access control in Haltom City means adding or repairing the system that opens the gate: keypads, remotes, phone entry, card readers, or video intercoms. On older 1950s to 1970s homes, the gate itself usually needs attention first because the post has moved in the clay and the leaf no longer travels smoothly. We do the mechanical work and the control wiring in one visit, and every job includes a photographed record of what was found and what was set. For the full service description, see Gate Access Control.
Keypad Entry
Signs you need it
The keypad is cracked, unresponsive, or the code works intermittently after rain.
What it costs in Haltom City
Replacing a keypad typically runs $275 to $575 including the new unit and programming.
How we do it
We pull the old keypad, check the wiring at the operator board, install the new unit, program the codes, and photograph the finished setup.
Remote Control
Signs you need it
The gate only opens from one remote, the range has dropped to a few feet, or a new vehicle needs a transmitter.
What it costs in Haltom City
Adding or replacing a remote and receiver runs $185 to $420 depending on the brand and whether we’re programming an existing receiver.
How we do it
We test the receiver, match the new remote to the operator, program all existing transmitters, and leave you a written record of what was paired.
What Gate Access Control Costs in Haltom City
| Item | Typical range in Haltom City |
|---|---|
| Keypad replacement | $275 - $575 |
| Remote and receiver | $185 - $420 |
| Phone entry or card reader add-on | $600 - $1,400 |
Can you add a keypad to my existing Haltom City gate?
Yes, as long as the operator has a compatible control board. We wire the keypad into the open command input and program the codes on site. If the gate itself is binding from clay movement, we address that first so the keypad isn’t fighting a mechanical problem.
Why does my gate opener work from the remote but not the keypad?
The keypad’s wiring or the operator’s auxiliary input is usually at fault. Moisture in the keypad housing after North Texas rain is a common cause. We test voltage at the board and replace or rewire the keypad, then photograph the settings we changed.
Gate Parts & Welding in Haltom City
Gate parts and welding in Haltom City usually comes down to hinges, posts, rails, or the steel frame itself. The clay here works against every welded joint and every hinge barrel, so what starts as a sagging gate is often a broken weld or a post that has moved out of plumb. We repair or replace the part, weld where the job calls for it, and photograph the finished work. For the full service description, see Gate Parts & Welding.
Hinge Replacement
Signs you need it
The gate drags on the latch side, the hinge pins are worn oval, or the leaf has dropped enough to scrape the driveway.
What it costs in Haltom City
Replacing a pair of gate hinges runs $180 to $420 for most residential gates.
How we do it
We support the gate leaf, cut or unbolt the old hinges, weld or bolt the new ones, and rehang the gate to clear evenly.
Post Replacement
Signs you need it
The post leans visibly, the concrete at the base is cracked, or the gate won’t hold a latch position after every rain cycle.
What it costs in Haltom City
Post replacement runs $350 to $750 per post depending on depth and whether the old concrete has to be broken out.
How we do it
We dig out the old footing, set the new post in concrete sized for Haltom City’s expansive clay, rehang the gate, and photograph the new post before backfill.
What Gate Parts & Welding Costs in Haltom City
| Item | Typical range in Haltom City |
|---|---|
| Hinge replacement (pair) | $180 - $420 |
| Post replacement (per post) | $350 - $750 |
| On-site welding repair | $150 - $450 |
Do you weld on site in Haltom City?
Yes. We bring a mobile welding setup for most gate repairs, which lets us fix a cracked frame or broken hinge mount without removing the gate from the property. We photograph the weld before and after and leave you a written record of what was done.
Can you repair a gate post that keeps leaning in Haltom City’s clay?
Usually yes, by pulling the old post, enlarging the footing, and setting a new post deeper with concrete mixed for expansive soil. If the post is structurally sound but moved, we may be able to plumb and re-set it instead of replacing it. We’ll tell you which one the job needs before any work starts, with a written price.
Brands We Service in Haltom City
We service Ghost Controls, DoorKing, Elite, and Mighty Mule operators, plus five other major automation brands. Common boards, remotes, and photo-eye parts are stocked locally so most Haltom City repairs are completed in one trip. See our brands for the full list.
Pricing for Gate Repair in Haltom City, TX
| Service | Typical range in Haltom City |
|---|---|
| Gate repair (mechanical) | $150 - $450 |
| Gate installation | $1,800 - $4,500 |
| Gate motor / opener replacement | $850 - $1,950 |
| Keypad replacement | $275 - $575 |
| Remote and receiver | $185 - $420 |
| Phone entry or card reader add-on | $600 - $1,400 |
| Hinge replacement (pair) | $180 - $420 |
| Post replacement (per post) | $350 - $750 |
| On-site welding repair | $150 - $450 |
In Haltom City, the two things that push a gate repair price up are post movement from the clay and rust at the hinge and frame joints that’s been left alone for years. Whatever the number is, you get it in writing before we pick up a tool, and that’s the price you pay.
Neighborhoods We Serve in Haltom City
We work across Haltom City’s older east and north side neighborhoods, the streets around Denton Highway, and the residential pockets near Airport Freeway. Most gate repair calls in Haltom City can be scheduled same day or next day depending on the time of the call.
- Eastside Haltom City
- North Haltom City
- Buffalo Ridge area
- Haltom Road corridor
- Denton Highway district
Service Area - Cities Near Haltom City
We also provide gate repair in the surrounding Tarrant County cities. If you’re just outside Haltom City, you’re still in our service area. We work regularly in Fort Worth, TX, North Richland Hills, TX, Hurst, TX, and Bedford, TX, and we schedule Haltom City calls the same way: a live person answers, and a written price comes before any work.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Haltom City
Most non-emergency gate repairs in Haltom City can be scheduled same day or next day depending on when you call. If a gate is stuck open or a vehicle is trapped inside, we prioritize it. A live person answers at (817) 476-9945 any hour, and we’ll tell you the soonest available window on that call.
Most straightforward gate repairs and part replacements don’t require a permit in Haltom City. If a full installation involves new footings or electrical work, Haltom City may require a permit depending on the scope. We’ll check the current requirement for your specific job before work starts and include any permit cost in the written price.
Yes. We’ll give you a free second opinion on any written estimate from another company, and we’ll match it against what we find on site. If another company worked on the gate and the problem came back, we document what we find and photograph everything before we touch it, so you’re not paying twice to rediscover the same issue.
Yes. We work on commercial slide gates along Haltom City’s Denton Highway and Airport Freeway corridors, including 1990s-era operators that are reaching end of life. We service the existing motor and control system first, and only recommend replacement when the operator board or gearbox can’t be reliably repaired. You get a written price either way.
Every repair we complete in Haltom City carries our 365-Day Done Right Promise: if the repair isn’t right within one year, we make it right at no additional charge. The written price you approve before the job starts is the price you pay, and every visit includes a documented photo record of what was found and what was changed.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Haltom City Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.