Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Fort Worth, TX
Gate access control in Fort Worth runs head-on into two local realities: the Blackland Prairie clay that heaves gate posts out of plumb with every wet-dry cycle, and a housing stock split between 1920s bungalows in Fairmount and HOA-governed steel-gate communities along the Alliance corridor. A keypad that works in June can sit two inches out of alignment by September, not because the hardware failed but because the ground under the post moved. We’ll fix the misalignment, reset the operator, and hand you a written record of what changed. Call (817) 476-9945 and a live person answers.
Why Fort Worth Homes Are Different
Fort Worth gate work splits into two distinct markets. Western Tarrant County still runs on heavy pipe-panel ranch gates across horse properties where the gate has to hold back livestock, not just look right from the curb. Meanwhile, master-planned communities up the Alliance corridor and through Fossil Creek and Walsh Ranch run ornamental steel driveway gates under HOA rules that dictate height, color, and even operator type. A tech who only knows one side of this split will misread the other.
The soil compounds every job. Blackland Prairie clay expands when it rains and bakes hard during drought, torquing posts, misaligning photo-eyes, and cracking the concrete pads under entry pillars. We see this on service calls in Ryan Place and the bungalow streets of Fairmount, where original wrought-iron gates from the 1920s sit on footings never designed for this much movement. The February 2021-style ice storms added another layer: battery backup units and operator boards that survived years of heat failed hard when the freeze hit. Fort Worth doesn’t have one gate problem. It has three or four, stacked.
Our Main Fort Worth Services
Most Fort Worth homeowners call us for one of three things: a gate that won’t open, a gate that needs to be replaced, or a motor that quit. Here’s what each job involves here.
Gate Repair in Fort Worth
A leaning post in western Tarrant County almost never means a bad install. It means the black gum clay moved, and the fix requires excavating to 36 to 42 inches, installing a belled concrete footing, and repouring rather than backfilling with gravel like a tech trained in sandy-soil markets might default to. We reset posts, rebuild hinges, replace broken pickets, and realign operators to the new post position. Every repair gets a written price before we touch a tool. Gate Repair in Fort Worth
Gate Installation in Fort Worth
HOA communities along the Alliance corridor and in Walsh Ranch usually require ornamental steel on a specific post depth, and the clay soil means that depth matters more here than it does in Dallas. We install driveway and pedestrian gates on footings sized for Fort Worth’s ground movement, with the operator, safety edges, and photo-eyes set to match the gate’s weight and swing. You get a written scope before any material is ordered. Gate Installation in Fort Worth
Gate Motor & Opener in Fort Worth
North Texas temperature swings are hard on operator boards, and post-storm surge calls after freeze events are common across Tarrant County. We service nine automation brands so we can work on the motor already on the property instead of steering you toward a replacement. Limit-switch resets, battery backup swaps, and arm-bracket repairs are the bulk of the work. Gate Motor & Opener in Fort Worth
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Fort Worth
Gate access control in Fort Worth means deciding who gets in and when, then making that system hold up against clay soil movement and hard freezes. A keypad on a post that shifts two inches will start dropping digits; a photo-eye knocked out of alignment by ground movement will refuse to close the gate even when no one is there. Every access control job under Gate Access Control gets a written price and a photographed record of what we set, including limit-switch readings and final component positions.
Keypad Entry
Signs you need it
The keypad works intermittently, ignores specific codes, or sits on a post that has shifted out of plumb and now reads key presses erratically.
What it costs in Fort Worth
Keypad replacement in Fort Worth typically runs $185 to $340 per keypad, with the higher end covering weatherproof commercial units rated for full sun exposure on a western-facing ranch gate.
How we do it
We test the existing keypad’s output at the control board, confirm whether the failure is in the keypad or the wiring, then replace and reprogram the unit and photograph the new code settings before we leave.
Video Intercom
Signs you need it
The video feed drops when the gate moves, the night vision is fogged by condensation, or the indoor monitor no longer rings when a visitor presses the call button.
What it costs in Fort Worth
Video intercom installation in Fort Worth typically runs $640 to $1,950 depending on whether we’re wiring a new run to the house or replacing an existing unit, with Wi-Fi and cellular bridge options pushing toward the upper end.
How we do it
We confirm power at the intercom station, check the signal path back to the monitor, replace or re-pair the unit, and document the final settings and wiring connections with photographs.
What Gate Access Control Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Keypad entry | $185 - $340 per keypad |
| Video intercom | $640 - $1,950 |
| Access control panel replacement | $410 - $950 |
Does gate access control work during a power outage in Fort Worth?
Most systems default to a battery backup or a manual release when the power drops. The February 2021 ice storm taught a lot of Fort Worth homeowners that unmaintained backup batteries die silently. We test backup function during every access control service call.
Can you add a keypad to my existing gate motor in Fort Worth?
Usually yes, as long as the motor has an accessory input or a compatible receiver. We wire the keypad to the operator’s open command, then document the new connection. Call (817) 476-9945 and we’ll confirm compatibility while you’re on the phone.
Gate Parts & Welding in Fort Worth
Gate parts and welding in Fort Worth means replacing what the clay soil and the weather have worked loose or cracked: hinges pulled from posts, rails bowed by ground pressure, and ornamental iron that needs a clean weld rather than a bolt-on patch. Gate Parts & Welding work here is mostly post-reset related, because a post that shifted under a wet spring puts every attached component under load it was never designed to carry.
Hinge Replacement
Signs you need it
The gate drags on the latch side, the hinge barrel is visibly bent, or the gate sags enough that the operator struggles to move it.
What it costs in Fort Worth
Hinge replacement in Fort Worth typically runs $95 to $220 per hinge including removal, fitting, and welding, with heavy ranch-gate barrel hinges on pipe frames landing at the top of that range.
How we do it
We unload the gate, cut or unbolt the old hinge, weld the new one in position, then re-level the gate and photograph the finished weld and gate alignment.
Post Replacement
Signs you need it
The post leans more than a degree or two out of plumb, the gate no longer latches without lifting, or a hairline crack runs through the concrete footer at the base.
What it costs in Fort Worth
Post replacement in Fort Worth typically runs $385 to $815 per post, depending on depth and whether the job requires a belled concrete footer for Blackland Prairie clay versus a standard 24-inch set.
How we do it
We excavate to 36 to 42 inches, set the new post in a belled footing sized for clay movement, brace it until the concrete cures, then rehang the gate and confirm the operator’s limit switches still read correctly.
What Gate Parts & Welding Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Hinge replacement | $95 - $220 per hinge |
| Post replacement | $385 - $815 per post |
| Gate roller replacement | $70 - $190 per roller |
Can you weld a broken ornamental iron gate in Fort Worth?
Yes, if the break is in a solid section of the frame or picket. If rust has thinned the surrounding metal, we’ll tell you before welding because the weld won’t hold long-term. We photograph the repair before and after.
Do you carry gate parts locally in Fort Worth?
We keep common hinge barrels, rollers, keypads, and photo-eyes on the truck for Fort Worth service calls. Specialty parts for older DoorKing or Viking operators usually arrive within a few days, and you’ll know the part price before we order.
Brands We Service in Fort Worth
We work on Viking, Ghost Controls, DoorKing, and Elite operators, along with five other major automation brands, so the motor already on your Fort Worth property is the one we fix. Our brands page lists full compatibility. Common boards and safety edges are kept stocked on local trucks.
Pricing for Gate Repair in Fort Worth, TX
| Service | Typical range in Fort Worth |
|---|---|
| Keypad entry replacement | $185 - $340 per keypad |
| Video intercom | $640 - $1,950 |
| Access control panel replacement | $410 - $950 |
| Hinge replacement | $95 - $220 per hinge |
| Post replacement | $385 - $815 per post |
| Gate roller replacement | $70 - $190 per roller |
| Custom welding (per 30 min) | $75 - $180 |
| Rail repair | $120 - $350 per rail |
What pushes a Fort Worth price up is usually the soil, not the hardware. A post that has to be excavated to 42 inches and set in a belled footing costs more than a simple reset in stable ground. What doesn’t change is the price we hand you in writing before any work starts. That’s Clause 1 of The Haven Standard, and it applies to every line item above.
Neighborhoods We Serve in Fort Worth
We run gate repair calls across Fort Worth daily, from the bungalow streets of Fairmount and Ryan Place to the HOA subdivisions of Alliance, Fossil Creek, and Walsh Ranch, and west into the ranch properties of Tarrant County.
- Fairmount
- Ryan Place
- Alliance corridor
- Fossil Creek
- Walsh Ranch
Response time across the Fort Worth service area is typically same-day for emergency calls and within 24 to 48 hours for scheduled work.
Service Area - Cities Near Fort Worth
Beyond Fort Worth, our crews also cover the surrounding Tarrant County cities. If your gate is in Haltom City, TX, North Richland Hills, TX, Hurst, TX, or Kennedale, TX, the same written-price promise applies. A live person answers the phone 24/7 at (817) 476-9945 no matter which of these cities you’re calling from.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Fort Worth
Most Fort Worth emergency calls get a same-day dispatch, especially if a gate is stuck open or won’t close and the property is unsecured. Call (817) 476-9945 and a live person answers any hour, no voicemail loop and no callback queue.
Many Alliance corridor and Walsh Ranch communities require HOA approval for gate replacement or color changes. Repairs to existing hardware usually don’t trigger review, but if your HOA needs documentation, our written scope and photo record satisfy most architectural committee requests.
It can, which is why we set posts in belled concrete footings excavated to 36 to 42 inches in clay-heavy soil. That’s the difference between a gate that stays plumb through the next wet-dry cycle and one that leans again by spring. We’ll document every post depth we set so the next technician never has to guess.
Call Vance Gate Repair Fort Worth at (817) 476-9945 for a free estimate, a written price before any work starts, and a documented photo record of every repair we complete.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A.