Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Benbrook
Gate repair in Benbrook typically costs between $145 and $480 for most common fixes, with hinge and post work on larger acreage gates running $350 to $900 depending on post condition and access. Our Gate Repair team reaches most Benbrook properties within 90 minutes for emergencies, and we stock common Viking, Ghost Controls, and DoorKing parts locally so we’re not waiting on a distributor when your gate is stuck open. Benbrook’s combination of clay-heavy soil, older 1970s and 1980s gate hardware, and hail exposure creates a very specific set of failure patterns we see here more than anywhere else in the Fort Worth area. Call (817) 476-9945 and you’ll get a live person, not a call queue.
Why Vance Gate Repair Fort Worth Is Benbrook’s Preferred Gate Repair Company
Most of the gates we service in Benbrook sit on ranch-style lots developed between the 1960s and early 1990s, and the hardware from that era doesn’t match modern operator standards. When a homeowner near the Lake Benbrook corridor calls us about a gate that won’t close, the cause is rarely the motor. It’s a hinge post that shifted in clay soil, or a control board that predates photo-eye integration. Our technicians document what they find with photos and written notes before adjusting anything, because the next technician who opens that panel shouldn’t have to guess what was done.
We dispatch background-checked, uniformed technicians to Benbrook daily, and we coordinate scheduling from the Dallas-Fort Worth office so a crew can be routed to your property without a long wait. Every Benbrook customer gets a written price before any work begins. That means the number on the estimate is the number you pay, under Haven Standard Clause 1. If the repair isn’t right, the 365-Day Done Right Promise covers it for a full year at no additional charge.
Adrian Vance started this company in 2014 doing commercial access control, where every job required a paper trail and a wiring diagram. We bring that same documentation habit to residential gates in Benbrook. You get a photo log of what was found, what was adjusted, and what part number went in. No verbal handshake. No surprise invoice.
Our Gate Repair Services in Benbrook
Electric Gate Repair
Electric gate repair in Benbrook frequently involves older control boards and loop detectors that have been buried in clay soil for three decades. We diagnose the actual electrical fault rather than swapping parts on a hunch. A typical control board replacement on a 1980s-era swing gate in Benbrook runs $280 to $520 depending on the operator brand, and we’ll often save the existing motor if the board failure is the only problem. If you’ve got a gate that opens fine from the remote but won’t trigger from the keypad, the issue is usually the receiver or the loop detector, not the operator itself.
Automatic Gate Repair
Automatic gate repair in Benbrook means dealing with operators that have cycled through years of soil-induced misalignment. A swing gate operator is only as good as the posts it’s mounted on. When clay heave tilts a post even a few degrees, the operator fights the gate on every cycle, which burns out capacitors and strips gears far sooner than normal wear. We see this on properties throughout Benbrook, especially along the Lake Benbrook shoreline where soil moisture swings are most extreme. Our team checks post alignment first, then calibrates the operator to the gate’s actual travel rather than factory defaults.
Hinge & Post Repair
This is the most Benbrook-specific repair we handle. The Fort Worth Prairie clay beneath Benbrook shrinks hard in summer drought and swells after heavy rain, a cycle that repeats several times a year. Hinge welds shear from the strain, barrel hinges bind, and posts drift enough to trip the obstruction-detection safety stop on automatic operators. We re-plumb posts to correct vertical alignment, rebuild hinge barrels or weld new pin plates where needed, and set the gate back to a clean swing. On ornamental iron gates from the 1980s and earlier, this is almost always a better investment than replacing the gate leaf.
Gate Realignment
Gate realignment in Benbrook is not just cosmetic. A gate that drags against the ground or binds at the latch is exposing the operator, the hinges, and the post brackets to forces they were never designed to handle. We realign both the gate leaf and the operator mounting, then set limit switches to the gate’s corrected travel path. The whole job is photographed and noted in your file. If the post is the root cause, we’ll tell you honestly instead of just adjusting the hinge and hoping the clay doesn’t move again next season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Benbrook
We work on whatever motor is already on your property. In Benbrook, the most common units we encounter are Viking and DoorKing swing gate operators from the 1990s and 2000s, plus a growing number of Ghost Controls retrofits on pipe-rail gates built by homeowners on acreage lots. We service all nine major automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your operator is obsolete or the control board is no longer made, we’ll tell you what replacement options exist across brands, with a written price for each. We won’t steer you to a full system replacement unless the numbers show it’s the cheaper long-term answer.
Common Gate Repair Problems We See in Benbrook Homes
- Clay heave shifting hinge posts. Benbrook’s expansive prairie clay shrinks and swells enough to move a gate post several degrees in a single season. That movement throws swing gate operators out of alignment and, left unaddressed, shears hinge welds within a year or two.
- Obsolete control boards on 1970s and 1980s automatic gates. Many older Benbrook estates still run original-issue boards that predate modern safety photocell and keypad entry standards. These boards fail gradually, causing intermittent operation or full lockout. Some can be retrofitted; others need board-level replacement.
- Hail damage causing slide gate bind. North Texas hail routinely dents and warps lighter aluminum slide gate panels. When the panel deforms, it binds at the rack and pinion, which overworks the motor and eventually stalls the gate mid-travel. We straighten or reinforce the panel, then realign the rack.
- “Floating post” failures near Lake Benbrook. After heavy rain, swollen clay tilts posts just enough to trigger the obstruction-detection safety stop on automatic operators, leaving the gate stuck open. Homeowners often assume the motor failed. The actual fix is post re-plumbing and operator recalibration.
Pricing for Gate Repair in Benbrook, TX
Here are the actual numbers for Benbrook’s market. Most hinge and post repairs on residential swing gates run $180 to $420 for a single post, and $350 to $900 when both posts need re-plumbing or weld work. Gate realignment typically costs $145 to $280. Electric gate repairs such as control board replacement, loop detector swaps, or photo-eye correction range from $180 to $520 depending on the part and whether we’re matching an obsolete board with a modern equivalent. Full operator replacement on larger acreage gates near Lake Benbrook, where post footings and concrete work often come into play, runs $1,200 to $3,800 installed. You get the written price before any work starts, every time. Call (817) 476-9945 for a free estimate, or bring another company’s written estimate and we’ll review it at no cost.
We Also Serve Cities Near Benbrook
Our crews handle Gate Repair in Benbrook and surrounding areas including Fort Worth, Haltom City, Saginaw, and White Settlement. If your property sits near the Benbrook city limits or on the edge of these communities, we can likely reach you within the same service window. Call and we’ll confirm dispatch timing for your street.
Serving Benbrook, TX - Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Benbrook
The most common cause is a “floating post.” Benbrook’s expansive clay soil swells after heavy rain, tilting a hinge post just enough to trigger the obstruction-detection safety stop on your operator, which leaves the gate stuck open as a safety default. The fix is re-plumbing the post to true vertical and recalibrating the operator’s limit switches. Call (817) 476-9945 for an exact quote on post re-plumbing.
Yes, in most cases. Many 1980s and 1990s operators in Benbrook were installed before photo-eye safety requirements, and we retrofit them to current standards by adding an external photo-eye receiver or upgrading the control board to a unit that supports beam inputs. The retrofit cost in Benbrook typically runs $225 to $480 depending on whether the board also needs replacement. We’ll give you the written price before we start.
It’s normal for this area, but it’s not something to leave alone. Hail dents the aluminum panels that many Benbrook slide gates use, and the deformation causes the gate to bind at the rack and pinion. We straighten or reinforce the panel, then realign the rack so the motor isn’t fighting the gate on every cycle. A typical panel straightening and rack realignment runs $180 to $360. Estimates are free at (817) 476-9945.
Loop detectors rarely need resetting on a schedule. If your gate stops responding to a vehicle sitting on the loop, the issue is usually the loop wire itself, which can crack in Benbrook’s shifting clay soil, or the detector’s sensitivity setting, which may need adjustment after a post realignment shifts the electromagnetic field. We check loop resistance and sensitivity on every automatic gate repair visit. Call (817) 476-9945 and we’ll diagnose it on site.
The honest fix is re-plumbing the post, not just adjusting the hinge and hoping the clay settles back. Benbrook’s soil will move again, so we set the post with new footing or bracing designed for expansive clay, then realign the gate leaf and recalibrate the operator if one is installed. Post re-plumbing on an ornamental iron gate in Benbrook typically runs $280 to $520 for a single post. Call (817) 476-9945 and we’ll give you a written price on site.
Call Vance Gate Repair Fort Worth Anytime - We Answer Live
If your gate is stuck open, stuck closed, or making a sound it shouldn’t, call (817) 476-9945. A live person answers around the clock. We’ll schedule a technician for your Benbrook property, provide the written price before any work begins, and leave you with a photo record of everything we touched. That’s the Haven Standard, and it’s the only way we work.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, serving Benbrook and surrounding communities since 2014.
Gate Repair in Nearby Areas