Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Watauga, TX
Gate access control work in Watauga almost always starts with the same phone call: a keypad that won’t accept a code after a rain, or a gate that stopped responding to the remote sometime in the last freeze cycle. The housing stock here was built in a tight window between the early 1970s and mid 1980s, and the original gates on those lots are now hitting 40 to 50 years old all at once. We repair them in place when it makes sense and replace them when the post or frame has given out, always with a written price before any work starts. Call (817) 476-9945 and a live person answers, any hour.
Why Watauga Homes Are Different
Watauga is a compact city, barely 2.7 square miles, built out almost entirely during the 1970s and early 1980s as a dense tract-home suburb of Tarrant County. That matters for gate work because the cedar board-on-board privacy fences and their gates are aging in near-unison. A block where one gate post has heaved and tilted will almost always have two or three neighbors showing the same failure.
The soil is the engine behind most of it. Tarrant County’s expansive black clay swells hard after rain and cracks wide during summer drought, and that cycle pushes gate posts out of plumb on a roughly annual schedule. Summers over 100°F check and warp cedar boards fast. The February 2021 ice storm snapped hinges and split already-checked frames across the city. In Watauga, post-reset and re-hanging is the dominant repair, not the occasional one-off.
Most lots are modest, and the original hardware from the build era is well past its service life. We quote for what the gate actually needs, not a standard package.
Our Main Watauga Services
Most Watauga homeowners call us for one of three things: a gate that won’t stay closed, a gate that’s rotted or sagging past repair, or a motor that quit. Each has its own page with full pricing.
Gate Repair in Watauga
A sagging gate on a 1980s ranch home is usually a hinge problem, a post problem, or both. In Watauga the post is often the real culprit, heaved out of alignment by black clay. We reset the post, re-hang the gate, and photograph the work before we leave. Full pricing and sub-job detail is on the Gate Repair in Watauga page.
Gate Installation in Watauga
When the cedar frame has checked past the point of repair, a new gate built to match the existing fence line is the honest fix. We measure, order, and install with hardware sized for Watauga soil movement, not a generic kit. See Gate Installation in Watauga for what’s included and what it costs.
Gate Motor & Opener in Watauga
Motors that fail after a freeze or a power surge are common here, and many Watauga gates run on swing-arm openers that fight the same heaving posts as the gate itself. We service nine brands and don’t push replacement when a board or limit switch will do the job. Details on the Gate Motor & Opener in Watauga page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Watauga
Access control in Watauga means one thing for most homeowners: the keypad or remote that opens the gate stopped working, and the gate is now either stuck open or stuck closed. The age of the housing stock means many systems are first-generation installations now 15 to 20 years old, wired into posts that have moved. Our Gate Access Control service covers the electronics and the physical hardware together, because on a Watauga gate they fail together.
Keypad Entry
Signs you need it
The keypad accepts a code intermittently, works only when pressed hard, or has gone dark entirely.
What it costs in Watauga
Keypad replacement in Watauga typically runs $180 to $450 depending on brand and whether the post wiring is still intact.
How we do it
We test the old keypad, replace it if needed, re-secure the post wiring, and leave a photo record of the new unit and settings.
Remote Control
Signs you need it
The remote only works from a few feet away, stopped working after a battery change, or opens the gate but won’t close it.
What it costs in Watauga
Remote replacement and reprogramming typically costs $85 to $220 including the transmitter.
How we do it
We identify the receiver frequency, program the new remote on site, and verify range from both sides of the gate.
What Gate Access Control Costs in Watauga
| Item | Typical range in Watauga |
|---|---|
| Keypad replacement | $180 - $450 |
| Remote replacement & programming | $85 - $220 |
| Receiver board swap | $150 - $350 |
Can you fix a keypad the same day in Watauga?
Usually yes. We keep common keypad brands in the truck and a live person schedules the dispatch. Call (817) 476-9945 and we’ll confirm a time window.
Do you work on old gate systems still wired to the house?
Yes. Many Watauga homes have original 2000s-era wiring that’s still usable. We test the wire before replacing any component so you don’t pay for a part the wire would have killed anyway.
Gate Parts & Welding in Watauga
One thing about Watauga: the gates were all built by similar builders in the same era, so we see the same parts fail on the same schedule. Gate Parts & Welding is the answer when a hinge tears loose, a post rots at ground line, or a custom repair beats a full replacement. On a 40-year-old cedar gate, a clean weld or a proper post replacement can add another decade of service.
Hinge Replacement
Signs you need it
The gate drags on the ground, the hinge pin has pulled loose from the post, or the gate sags when opened.
What it costs in Watauga
Hinge replacement on a standard cedar gate runs $150 to $400 per hinge depending on post condition.
How we do it
We pull the old hinge, inspect the post wood, install the new hardware with structural screws, and photograph the final fit.
Post Replacement
Signs you need it
The post leans more than a few degrees, wobbles when the gate is pushed, or has visible cracks at ground level.
What it costs in Watauga
Post replacement with concrete in Watauga ranges $400 to $900 depending on post size and how much old concrete needs to come out.
How we do it
We cut the old post, dig out the failed footing, set a new pressure-treated post in concrete, and re-hang the gate straight.
What Gate Parts & Welding Costs in Watauga
| Item | Typical range in Watauga |
|---|---|
| Hinge replacement per hinge | $150 - $400 |
| Post replacement with concrete | $400 - $900 |
| Custom welding repair | $120 - $350 |
Can you weld a broken gate frame in Watauga?
Yes, when the metal is thick enough to take a weld and the break is at a stress point worth saving. We’ll tell you if the frame is too far gone and a replacement is the cheaper option.
How long does a post replacement last?
A properly set pressure-treated post in concrete typically holds its line for 10 to 15 years in Watauga’s clay, even with the seasonal heave cycle. We photograph the installation so the record exists for the next service.
Brands We Service in Watauga
We service Viking, Ghost Controls, DoorKing, and Elite automation on Watauga gates, along with five other major brands. Common parts stay stocked on the trucks, which keeps most access-control and motor repairs to a single visit. See our brands for the full list.
Pricing for Gate Repair in Watauga, TX
| Service | Typical range in Watauga |
|---|---|
| Keypad replacement | $180 - $450 |
| Remote replacement & programming | $85 - $220 |
| Receiver board swap | $150 - $350 |
| Hinge replacement per hinge | $150 - $400 |
| Post replacement with concrete | $400 - $900 |
| Custom welding repair | $120 - $350 |
What pushes a Watauga price up: a post that was set in a shallow footing and needs a full re-dig, a gate frame too rotted to weld, or wiring that the freeze cycle damaged back to the house. The written price we hand you before the work starts is the price you pay, no surprise invoice at the end.
Neighborhoods We Serve in Watauga
We cover the whole city, and because Watauga is small and dense, we’re usually on site the same day you call for a repair. Typical areas include:
- Watauga Meadows
- Foster Village
- Quail Hollow
- Park Vista
- North Watauga
Service Area - Cities Near Watauga
We also serve homeowners in Fort Worth, TX, Haltom City, TX, Saginaw, TX, and White Settlement, TX. If you’re on the edge of Watauga and not sure which page applies, call (817) 476-9945 and we’ll route the right crew.
Serving Watauga, TX - Our Local Coverage Area
We’re based in the Watauga area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Watauga
In most Watauga residential cases, replacing an existing gate on the same fence line does not require a permit. If the work involves a new driveway gate with an opener or changes the fence height, check with the city’s permitting office before we start. We’ll flag it if it applies.
Some Watauga neighborhoods have HOAs that require approval for a gate style change, though repairs to an existing gate rarely need it. If you’re changing the look or adding an opener, have your HOA rules available when we quote so the written price matches what’s actually allowed.
Yes. A live person answers the phone at (817) 476-9945 seven days a week, and we dispatch Watauga service calls on weekends as well as weekdays. The estimate is free and the price is written before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Watauga Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.