Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Azle
Most driveway gate installations in Azle run between $3,800 and $11,500, depending on whether you’re hanging a single swing gate on pipe-and-rail ranch fencing or a full double-slide setup with automation. Our crews serve Azle from the Dallas-Fort Worth metro office, and we schedule on-site measurements within a few days of your call. The difference out here isn’t just the gate itself. It’s the clay under the posts. We’ll get to that, because it changes what a correct install looks like in Azle versus Keller or Haltom City. Every job gets a written price before any work starts. Call (817) 476-9945 to get your measure on the books.
Why Vance Gate Repair Fort Worth Is Azle’s Preferred Gate Installation Company
Azle properties aren’t like the platted subdivisions to the east. We work on 5-acre horse properties off Flat Rock Road, older ranch homes on Kilburn, and everything in between. The common thread is clay. Heiden and Ferris clay, specifically. It moves. A gate company that doesn’t account for it sets posts at 24 inches, pours a straight-side footing, and the gate leans by Labor Day. We set posts differently here, and we document it with photos before the concrete goes in.
Adrian Vance started this company in 2014 wiring commercial access-control gates. That habit of photographing everything and writing down every limit-switch setting carried over into residential work. When we install a gate in Azle, you get a photo log of the footing depth, the post alignment before and after backfill, and the final operator settings. No other local gate installer hands you that record. Reviews from Azle customers mention the written quote before the job starts and the fact that the gate still swings true through summer drought. That’s what we design for.
We dispatch from the Dallas-Fort Worth office with techs who know the roads out here. Azle isn’t a far stop, and we don’t treat it like one. Most installations are quoted within 48 to 72 hours of the initial measure, and scheduling is straightforward. The phone is answered by a live person, day or night. No callback queue. Call (817) 476-9945 and someone picks up.
Our Gate Installation Services in Azle
Driveway Gate
Driveway gates in Azle are often the long kind. A 16-foot swing leaf or a slide gate on a track that runs along the fence line. On acreage, the driveway usually approaches straight off Tin Top Highway or one of the county roads, which means the gate takes full afternoon sun and the operator has to move significant weight. We size operators for the actual leaf weight and wind load, not the catalog number. Most driveway gate installs here run $4,200 to $9,800 with automation.
Pedestrian Gate
A separate walk gate keeps you from cycling the driveway gate every time someone walks out to the road. On Azle properties with horses, this matters more than people expect. The walk gate takes the daily traffic and saves wear on the automated leaf. We build and hang pedestrian gates that match the perimeter fence, whether that’s welded pipe, ornamental iron, or a mix. Typical cost: $1,200 to $3,400 installed.
Sliding Gate
Slider gates fit Azle driveways where the approach is too steep or too short for a swing leaf to clear. A cantilever slide gate rides above the ground on rollers and doesn’t need a track in the dirt, which matters when you’re dealing with shifting clay and gravel drives. On long ranch driveways with poor soil or tight turn radius, we recommend slide gates more often than swing gates. Installed cost in Azle typically runs $5,500 to $12,000, depending on leaf material and operator brand.
Swing Gate
Swing gates are the most common gate type on Azle acreage. They’re also the most affected by post movement. When a swing gate binds mid-travel or scrapes the ground in August, it’s almost always the post, not the operator. We install swing gates with the deep flared-bell footings this soil demands, and we rehang existing leaves when the frame itself is still sound. Full swing gate install with automation in Azle: $4,000 to $9,500.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Azle
We install and service operators from Gate Installation brands you already see on Azle properties: Ghost Controls, DoorKing, Elite, and Mighty Mule, along with five others including LiftMaster and FAAC. If your current operator is a 1990s FAAC or Viking unit and you want to keep it, we’ll tell you honestly whether retrofitting safety photocells and a new control board makes sense or whether a modern operator is the cheaper path. Parts for common Azle installs are stocked locally, so we aren’t waiting on a distributor in Dallas when your gate is down. One company, nine brands, no push toward replacing what can be fixed.
Common Gate Installation Problems We See in Azle Homes
- Post lean from clay heave. Shallow 24-inch footings set by crews from Keller or Haslet shift within one season here. The post twists, the gate frame binds, and the operator fights the load until a capacitor blows.
- Legacy operator burnout. Pre-UL 325 control boards lack thermal protection. A south-facing gate on open acreage bakes in 100-degree heat and the board fails mid-cycle. We see this most on older FAAC and Viking units.
- Ice storm hinge damage. The February 2021 freeze put stress on every gate in Azle. Freeze-thaw cycles on already-heaving clay snapped hinge welds and cracked concrete around posts. Some gates failed months later, in spring.
- Worn hinge bearings on pipe-and-rail gates. Older ranch gates on 1970s to 1990s properties were built heavy and hung on light hardware. The bearing wears, the leaf drops, and the gate drags. A rehang with proper bearings usually fixes it without replacing the leaf.
Pricing for Gate Installation in Azle, TX
Here’s what we quote on Azle jobs, in writing, before anything gets bolted down. Single swing driveway gate with automation: $4,000 to $6,800. Double swing gate: $6,500 to $9,500. Cantilever sliding gate: $5,500 to $12,000. Pedestrian gate matching existing fence: $1,200 to $3,400. Deeper flared-bell footings (the kind this clay actually needs) add $180 to $400 per post over a standard straight-side pour. That’s the cheapest insurance against a leaning gate, and we recommend it on every Azle install. The price we hand you is the price you pay. Free measure and written quote at (817) 476-9945.
We Also Serve Cities Near Azle
Our crews handle Gate Installation in Azle and the surrounding area, including Keller, Haltom City, Fort Worth, and North Richland Hills. If your property sits just outside Azle proper, call us. We’ll let you know if we cover your road and get the measure scheduled.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Azle
Posts in Azle’s Heiden and Ferris clay should be set 36 to 42 inches deep with a flared bell at the bottom of the concrete footing. That depth gets below the active shrink-swell zone that moves from wet spring to dry August. Every Azle install we quote includes this spec by default. We photograph the augered depth before pouring. Call (817) 476-9945 for an exact quote on your gate.
Sometimes, and we’ll tell you the truth either way. If the leaf and hinges are sound, we can retrofit the gate with modern UL 325-compliant photocells, edge sensors, and a new control board for roughly $900 to $1,800 per operator. If the board is obsolete or the frame has fatigue cracks, replacement is cheaper than repeated retrofits. We document what we find and show you the photos before quoting either path. Estimates are free at (817) 476-9945.
The ice storm cracked concrete and shifted posts by fractions of an inch. The gate frame bound slightly, the operator drew more current every cycle, and the control board eventually burned out. The gate “looks fine” because the damage was in the footing and the board, not the visible leaf. We check post plumb and operator current draw on every post-freeze service call in Azle. Call (817) 476-9945 and we’ll diagnose it properly.
If your driveway approach is flat and you have room for the leaf to clear a vehicle, a swing gate is usually less expensive and easier to maintain. If the approach is steep, the driveway is gravel with poor drainage, or you’re tight on setback, a cantilever slide gate handles the grade better and doesn’t drag in mud. On Tin Top corridor properties, we lean slide gate when the driveway pitches toward the road. A free site measure settles it. Call (817) 476-9945.
Deeper flared-bell footings add $180 to $400 per post over a standard straight-side pour. In Azle, it’s worth it every time. A standard footing set at 24 inches fails here within a season or two, and the re-leveling call costs more than the footing upgrade. We bid every Azle install with the deep spec included, so you never have to ask for it. Written quote before work starts, every job. Call (817) 476-9945.
On the acreage roads off Kilburn and Tin Top Highway, the heavy black clay expands and contracts so violently that a gate post set plumb in a wet spring can lean 2 to 3 inches out of alignment by late August drought. Gate companies from Keller or Haslet rarely specify the deep flared-bell footings that Azle gates actually require. We do, on every single quote, because we know what this soil does. That’s the difference between a gate that works for 15 years and one that binds by fall.
We just finished an install on a 5-acre horse property off Flat Rock Road where a 1990s FAAC swing gate had torn its hinge post out of plumb for the third time. Our crew removed the old post, augered down 42 inches to get below the active clay zone, poured a flared-bell footing, and rehung the gate with a new LiftMaster LA400 operator and safety photocells. It has stayed dead-level through two summer droughts. That’s the spec we’ll write for your gate in Azle.
Need a gate installed, retrofitted, or rehung in Azle? Call Vance Gate Repair Fort Worth at (817) 476-9945. We’ll schedule a free on-site measure, hand you a written price, and leave you with a photo record of everything we set, poured, and wired. A live person answers, any hour.
Written by Adrian Vance, Owner at Vance Gate Repair Fort Worth, serving Azle since 2014.