Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Azle, TX
Gate access control in Azle means keypads, remotes, phone entry, card readers, and video intercoms on properties where the driveway often runs 200 feet or more from the road. The work here skews toward ranch gates and horse-property entrances, and the expansive clay soil means posts shift seasonally, which throws keypad housings out of level and stresses wiring at conduit joints. If your gate opens but the entry system won’t release it, or the keypad works only in dry weather, call (817) 476-9945 and we’ll diagnose it on site.
Why Azle Homes Are Different
Most of Azle sits on Heiden and Ferris clay, the same expansive soils that crack foundations across Parker and Tarrant counties. A gate post set in wet spring soil can move two or three inches by August, and that movement pulls keypad conduit, binds hinges, and knocks photo-eyes out of alignment. We see it constantly on the acreage roads off Kilburn and Tin Top Highway, where deep concrete footings with flared bells are the only thing that keeps a post plumb through the dry season.
Azle’s housing stock predates most of the suburban gate work we see elsewhere. Homes from the 1970s through the 1990s on larger lots often have welded pipe ranch gates with simple chain-link or pipe-and-rail fencing. Newer acreage subdivisions mix in ornamental iron and automatic operators. On the same street, we might reset a 40-year-old hinge on a pipe gate in the morning and wire a new video intercom on a custom iron driveway gate in the afternoon. The freeze-thaw cycle after the February 2021 ice storm accelerated a lot of post movement, and summer heat on south- and west-facing gates still pushes operators past their thermal limits on open lots with little shade.
Our Main Azle Services
These three pages cover the calls we get most from Azle homeowners. Each page goes deeper on that service, with local pricing and specific repair scenarios. Here’s the short version of what we handle.
Gate Repair in Azle
Gate repair in Azle usually means a gate that has dropped, a hinge that has torn loose from a shifting post, or a frame that no longer closes square. On clay soil, we often find the post itself is the root cause, not the gate leaf. We level, reinforce, and re-weld, and you get a written price before work begins. Full service details are on the Gate Repair in Azle page.
Gate Installation in Azle
A new gate in Azle has to account for the soil under it. We specify deeper footings on Heiden clay and build for the gate’s actual use, whether that’s a horse trailer passing through or just daily car traffic. New installations include site measurement, material matching to existing fencing, and a documented record of the work. Details and local pricing are on the Gate Installation in Azle page.
Gate Motor & Opener in Azle
Motors on Azle acreage properties run long cycles in summer heat and freeze in winter without weather protection. We service nine automation brands, including Linear, Viking, Ghost Controls, and DoorKing, so we repair what’s already on the property instead of pushing a replacement. Limit switches, photo-eyes, and thermal shutdowns are common calls. See Gate Motor & Opener in Azle for the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Azle
Gate access control in Azle is the system that decides who gets in: keypads, remotes, phone entry, card readers, and video intercoms mounted at the driveway entrance. Because so many Azle properties sit on long private drives off roads like Tin Top Highway, a failed keypad or a stuck relay means a 300-foot walk to the house, and feed delivery drivers or farriers can’t reach the gate to hail anyone. The local clay soil compounds every problem because a shifting post pulls keypad wires taut and cracks conduit, which lets moisture into low-voltage connections and causes intermittent failures that show up only after rain. Every visit under our standard leaves you with a photo log of what was found and the part number installed, under Clause 4 of the Haven Standard. If your existing entry system isn’t working, see Gate Access Control for the full service detail.
Keypad Entry
Signs you need it
Your keypad works sporadically, fails after rain, or has buttons that stick and won’t register codes.
What it costs in Azle
Keypad replacement or repair in Azle typically runs $150-$450 depending on whether we replace the unit, the wiring, or both.
How we do it
We test voltage at the keypad, check the wire run for moisture intrusion at conduit joints, replace the unit if the board is corroded, and reprogram all codes.
Remote Control
Signs you need it
A remote works only from a few feet away, stops working entirely, or opens the neighbor’s gate instead of yours.
What it costs in Azle
Replacing a gate remote and reprogramming the receiver runs $95-$180 in Azle including the service call.
How we do it
We check the receiver antenna location and the remote battery, then pair a new transmitter or reprogram the existing one to the correct frequency.
Phone Entry
Signs you need it
Callers can’t hear the intercom, the gate won’t release from the app, or the system dials a disconnected number.
What it costs in Azle
Phone entry repair or replacement in Azle generally lands between $350 and $800 depending on cellular versus landline configuration.
How we do it
We verify the SIM or phone line, test the relay that opens the gate, reconfigure the call routing, and photograph the new settings.
What Gate Access Control Costs in Azle
| Item | Typical range in Azle |
|---|---|
| Keypad replacement | $150-$450 |
| Remote transmitter | $95-$180 |
| Phone entry system | $350-$800 |
Can you fix my keypad the same day in Azle?
Yes, in most cases. We stock common keypad models on the truck and dispatch from the DFW metro office to Azle every day. Call (817) 476-9945 and we’ll confirm today’s schedule when you call.
Will a new keypad work with my old gate motor?
Yes, if the motor accepts a dry-contact input, which covers most openers from Linear, Viking, Ghost Controls, and DoorKing. We match the keypad output to your motor’s control board on site.
Gate Parts & Welding in Azle
Gate parts and welding in Azle is the work that keeps an existing gate in service instead of replacing it: hinge replacement, post setting, rail repair, custom welding, and roller swaps. The acreage mix here means we weld on both bare pipe ranch gates and powder-coated ornamental iron, often on the same street. Heavy clay shifts posts and tears hinge welds loose, which is the most common failure we see on Azle gates. For more detail, see the Gate Parts & Welding hub page.
Hinge Replacement
Signs you need it
The gate drags on the latch side, the hinge pin is visibly leaning, or the weld at the post has cracked and rusted through.
What it costs in Azle
Hinge replacement in Azle typically runs $120-$260 per hinge, including cutting off the old hinge and welding on the new one.
How we do it
We cut off the failed hinge, grind the post clean, weld a new hot-dipped galvanized hinge in place, and photograph the finished weld.
Post Replacement
Signs you need it
The post leans visibly, the gate drops when it opens, or fresh cracks appear in concrete around the post base.
What it costs in Azle
Post replacement in Azle runs $450-$1,200 depending on post diameter, depth, and whether we’re removing old concrete.
How we do it
We dig the old post, set a new one in a deeper footing with a flared bell to resist the clay movement, and re-hang the gate level.
Rail Repair
Signs you need it
A rail has separated from a picket, the gate sags in the middle, or a vehicle strike has bent a rail and snapped a weld.
What it costs in Azle
Rail repair or replacement in Azle falls between $150 and $450 per rail depending on gauge and whether pickets need re-welding.
How we do it
We cut out the damaged section or straighten it cold, weld in new material, and match the finish as closely as the existing gate allows.
What Gate Parts & Welding Costs in Azle
| Item | Typical range in Azle |
|---|---|
| Hinge replacement (per hinge) | $120-$260 |
| Post replacement | $450-$1,200 |
| Rail repair (per rail) | $150-$450 |
Can you weld a broken gate on site in Azle?
Yes, our trucks carry mobile welding equipment. We cut, weld, and grind on site, then photograph the finished repair before we leave. Call (817) 476-9945 to schedule.
Will welding on my ornamental gate ruin the finish?
Welding burns the coating at the weld site, but we grind and prep the area and apply a matched protective finish. The repair won’t look factory-new, but it will be sound and protected.
Brands We Service in Azle
We repair and maintain operators from Linear, Viking, Ghost Controls, and DoorKing, among nine brands total. Common parts are stocked on our trucks for Azle calls. You can see the full list on our brands page. Most part replacements happen same-day.
Pricing for Gate Repair in Azle, TX
| Service | Typical range in Azle |
|---|---|
| Keypad replacement | $150-$450 |
| Remote transmitter | $95-$180 |
| Phone entry system | $350-$800 |
| Hinge replacement (per hinge) | $120-$260 |
| Post replacement | $450-$1,200 |
| Rail repair (per rail) | $150-$450 |
| Gate roller replacement | $90-$220 |
| Custom welding (per hour) | $95-$150 |
Prices in Azle push higher when a shifting post has caused secondary damage, like a torn hinge that requires post rework before the gate hangs level again. The price you’re quoted is the price you pay, in writing, before we start, under Clause 1 of the Haven Standard.
Neighborhoods We Serve in Azle
We work across Azle’s acreage subdivisions and older ranch-lot neighborhoods. Most calls are within a 30- to 40-minute dispatch window from the DFW metro office.
- Tin Top Highway corridor
- Kilburn Road area
- Azle town center
- Briar and the northeast lakeside roads
- Pedro Bay and Ash Creek
Service Area - Cities Near Azle
We also cover gate repair and installation in the surrounding Tarrant and Parker county area. If you’re in Keller, TX, Haltom City, TX, Fort Worth, TX, or North Richland Hills, TX, the same written-price standard applies.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Azle
Most Azle calls are reached within 30 to 40 minutes of dispatch from the DFW metro office. Emergency calls run the same day. Call (817) 476-9945 and a live person will answer at any hour.
Most repairs and like-for-like replacements don’t require a permit, but new automated gates with electrical runs can trigger local code review in some Azle neighborhoods. We handle the paperwork when it’s needed.
Yes, we routinely work on gates at horse properties and acreage operations around Azle. We coordinate entry and exit with you so animals stay secure, and we leave every gate closed and latched when we finish.
For any gate issue in Azle, call (817) 476-9945. We’ll give you a written price before any work starts, and you’ll leave with a photo record of what we did.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Azle Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.