Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Richland Hills, TX
Gate access control work in Richland Hills means solving entry problems on aging tract-home gates whose posts have been moving for sixty years in Tarrant County clay. We see keypads that worked fine for a decade suddenly failing because the gate frame shifted half an inch and the strike no longer aligns. Most of what we do here is mechanical correction first, electronics second. Call (817) 476-9945 and you get a live person, not a voicemail queue.
Why Richland Hills Homes Are Different
Richland Hills is a fully built-out, roughly two-square-mile enclave of 1950s to 1970s tract homes sitting directly atop black expansive clay. That clay shrinks and swells with every wet spring and dry August, and the original shallow-set fence posts throughout the city have been tilting ever since. Most were buried only 18 to 24 inches, well short of the 36-inch minimum now recommended for Tarrant County. The result is a specific, repeating repair pattern: gates that drag, latches that no longer meet, and frames racked enough to shear hinge screws. Drive the back alleys off Glenview Drive after a wet spring and you’ll spot the same lean toward the alley side block after block.
North Texas heat adds a second layer. Steel hinges and operator arms expand in 100-degree afternoons, then contract during the kind of winter ice event that hits Tarrant County harder than areas east. That freeze-thaw cycle works on concrete collars around posts that were already heaved, and we frequently find posts cracked right at the collar line. Any gate repair in Richland Hills that skips post depth and footing work in this clay is a seasonal patch, not a fix. Hardware here is often original or mismatched from decades of piecemeal repairs, and wooden frames wick moisture from sitting in clay that holds water after every rain.
Our Main Richland Hills Services
These are the three calls we hear most from Richland Hills homeowners, each with its own dedicated page for the detail.
Gate Repair in Richland Hills
Repair work here almost always starts with the post, not the hinge. The misalignment that has a gate dragging across the concrete is usually the ground moving underneath it, and we correct the post before we touch hardware. Gate Repair in Richland Hills covers the full diagnostic sequence and local price ranges.
Gate Installation in Richland Hills
Installing a new gate on Richland Hills clay means setting posts to a depth the original builders never used. We plan for 36-inch embedment with proper concrete collars so the new gate stays plumb through wet springs and dry summers. Gate Installation in Richland Hills walks through material choices and what a full job includes.
Gate Motor & Opener in Richland Hills
Swing-gate openers in this city fail in predictable ways, most often at the arm bracket when a heaving post changes the gate’s travel arc. We service nine major automation brands and diagnose the mechanical cause before replacing a motor. Gate Motor & Opener in Richland Hills covers the electronics and the arm geometry together.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Richland Hills
Gate access control in Richland Hills usually fails at the meeting point: the gate moved, so the lock, strike, or sensor no longer lines up the way it did when someone installed the keypad or card reader. On these 1950s to 1970s tract homes, the electronics are rarely the first thing that broke. The post moved under them and took everything else along. That makes this a two-part job here: correct the mechanical alignment first, then set and test the electronic entry. Our written scope covers both before any work starts, and every visit ends with a photographed record of wiring, settings, and the part numbers installed. See Gate Access Control for the full service detail.
Keypad Entry
Signs you need it
The keypad accepts a code but the gate only opens intermittently, or the keypad housing has pulled away from a shifted post.
What it costs in Richland Hills
Keypad replacement or reprogramming in Richland Hills typically runs $140 to $310, with the higher end applying when the post must be corrected for the keypad to sit flush.
How we do it
We test the wiring and output at the board, then correct any post shift before mounting, programming, and photographing the finished keypad.
Video Intercom
Signs you need it
The call button rings but the video feed blanks, or the gate release relay fires inconsistently from the monitor or phone app.
What it costs in Richland Hills
Video intercom service here runs $160 to $350 depending on whether the fix is wiring, a failed monitor, or a full unit replacement.
How we do it
We trace the signal path from gate station to monitor, replace what failed, then document the new wiring configuration and hand you the photo log.
What Gate Access Control Costs in Richland Hills
| Item | Typical range in Richland Hills |
|---|---|
| Keypad repair or replacement | $140 - $310 |
| Video intercom service | $160 - $350 |
| Card reader setup | $150 - $320 |
Can you fix a keypad on a leaning Richland Hills gate?
Yes. We correct the post or realign the gate first, then mount and test the keypad. Installing electronics on a moving gate without addressing the post means the misalignment returns.
Do you quote access control work in writing before starting?
Every access control job gets a written price before any tool comes off the truck. The scope lists the parts, the labor, and the exact work at the gate. Call (817) 476-9945 for that quote; estimates are free.
Gate Parts & Welding in Richland Hills
Gate parts and welding on Richland Hills properties often means working with steel that has sat in expansive clay for fifty years. Hinges shear, posts crack at the collar line, and welded frames pull apart when the ground shifts beneath them. We repair what can be repaired and document every replacement part by number and photograph. See Gate Parts & Welding for the full catalog of what we fabricate and replace.
Hinge Replacement
Signs you need it
Hinge screws have stripped out of a swollen or cracked post, or the gate sags visibly on the latch side but the frame tests square.
What it costs in Richland Hills
Hinge replacement here typically runs $80 to $190 depending on hinge weight class and whether the post needs a sleeve or repair plate.
How we do it
We match the hinge to the gate’s weight, repair the mounting surface, weld or bolt the new hardware, and photograph the finished mounting.
Post Replacement
Signs you need it
The post leans hard toward the alley side after a wet season, shows a crack at the concrete collar line, or tests plumb but wobbles under load.
What it costs in Richland Hills
Post replacement in Richland Hills runs $450 to $1,100 depending on depth, footing size, and whether the old concrete must be saw-cut out first.
How we do it
We dig or saw out the old footing, set the new post to a 36-inch minimum in this clay, pour a proper collar, and let it cure before re-hanging the gate.
What Gate Parts & Welding Costs in Richland Hills
| Item | Typical range in Richland Hills |
|---|---|
| Hinge replacement | $80 - $190 |
| Post replacement | $450 - $1,100 |
| Custom welding repair | $150 - $400 |
Does welding make sense on an old Richland Hills gate?
Often yes, especially on steel frames still holding their geometry. We inspect the full frame first and only weld where the base metal is sound enough to hold. Call (817) 476-9945 and we’ll tell you straight.
How deep should a Richland Hills gate post actually be set?
Thirty-six inches minimum in Tarrant County clay, with a proper concrete collar. Most original posts here were set at 18 to 24 inches, which is why they lean after a wet spring.
Brands We Service in Richland Hills
We work on Viking, Ghost Controls, DoorKing, and Elite operators in Richland Hills, among nine major automation brands. Common replacement parts are stocked in our DFW office and dispatched to Richland Hills the same day, so most motor and board repairs finish in a single visit. See our brands for the full list.
Pricing for Gate Repair in Richland Hills, TX
| Service | Typical range in Richland Hills |
|---|---|
| Gate repair (general) | $90 - $380 |
| Hinge replacement | $80 - $190 |
| Post replacement | $450 - $1,100 |
| Keypad repair or replacement | $140 - $310 |
| Video intercom service | $160 - $350 |
| Card reader setup | $150 - $320 |
| Custom welding repair | $150 - $400 |
| Gate motor repair | $160 - $380 |
Richland Hills pushes cost upward in two situations: post heave that requires footing work before any hardware can be touched, and old wood frames that must be reinforced before they can carry an operator. The written price you receive before work starts is the price you pay; nothing changes mid-job without a signed change order.
Neighborhoods We Serve in Richland Hills
Richland Hills is small enough that we’re almost never more than twenty minutes out, and our crews move through the city’s residential streets daily. The neighborhoods are mostly 1950s to 1970s tract-home blocks, and the gate problems change block by block depending on how the original lots were graded.
- Glenview Drive corridor
- Areas around Richland Hills City Hall
- Residential streets off Baker Boulevard
- Blocks near Richland Park
- The alley-fed lots south of Rufe Snow Drive
Service Area - Cities Near Richland Hills
Our crews cover the surrounding Tarrant County communities where the same clay-soil gate problems show up. We also serve Fort Worth, TX, Haltom City, TX, Saginaw, TX, and White Settlement, TX. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office; crews serve Richland Hills locally.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Richland Hills
Most Richland Hills calls are reached within the same day for urgent failures like a gate stuck open or a post that has shifted and locked the latch. We’ll tell you an arrival window when you call (817) 476-9945 and a named technician with a photo is provided before dispatch.
Repairs and part replacements generally don’t require a permit in Richland Hills. New gate installation or post work that changes the fence line may need city review, and we check that before we dig. The written scope lists any permit step.
Always. The flat price is written and handed over before any work begins, and nothing changes without your signed approval. That’s the whole point of our upfront pricing standard, and it includes a recorded photo log when the job is finished.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richland Hills Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.