Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Burleson, TX
Gate access control problems in Burleson usually trace back to one of two things: an entry system that was installed before the 2015 building boom and is now failing from age, or a keypad that stopped talking to the opener after a North Texas storm. Most homes here are 2000s-era tract builds with HOA-governed ornamental iron driveway gates, and the control systems on those gates are reaching end-of-life at the same time. Whether you need a new keypad, a phone-entry retrofit, or a full access-control overhaul, we provide a written price before any work begins. Call (817) 476-9945 for a free estimate.
Why Burleson Homes Are Different
Burleson sits on the shrink-swell Blackland Prairie clay belt, and that soil drives more gate work here than any other single factor. After a wet spring, the clay swells and pushes posts outward; after a summer drought, it contracts and drops them. A gate that was level in March can bind at the latch by August. On top of that, the city’s residential surge between roughly 2003 and 2015 produced a dense wave of subdivisions where the original gates are all entering first-failure territory at once. Many of those neighborhoods, especially the HOA-governed communities, specify black powder-coated ornamental iron for replacements, so a rotted cedar side-yard gate often needs to become an iron one to stay compliant. Winter Storm Uri in 2021 left a lingering mark too: snapped hinges, seized motors, and cracked boards that were never properly repaired. A Burleson gate repair has to account for soil movement, HOA finish rules, and storm damage in a way a generic gate job in a different county might not.
Our Main Burleson Services
Two gate issues dominate the call volume in Burleson: repairs to aging gates and openers, and full replacements where HOA rules or storm damage make patching impractical. Here’s how each one works locally.
Gate Repair in Burleson
Most repair calls in Burleson come from gates that worked fine for ten years and then started sagging, dragging, or refusing to close after a wet spring. We’ve replaced hinges on ornamental iron entry gates where the post had leaned four inches, realigned slide gates on caliche driveways along the rural southern edge, and rewired openers that Winter Storm Uri cooked. Before any work starts, you get a written price. After the work is done, you get a photo log of every adjustment. Learn what a full repair visit covers on our Gate Repair in Burleson page.
Gate Installation in Burleson
Replacement gates in Burleson often start with an HOA question: does the community require black powder-coated ornamental iron, and does the new gate need to match the existing entry design? We handle that compliance check before ordering materials, which saves you a second visit and a potential fine. New posts in this clay should be set deeper than code minimums with proper concrete footings or helical anchors, because a shallow set will heave within two seasons. The full installation scope, including tear-out, post setting, and opener integration, is on our Gate Installation in Burleson page.
Gate Motor & Opener in Burleson
Burleson’s acreage properties along the south and west edges run swing-arm and slide openers on long driveways, while the subdivisions lean on LiftMaster, FAAC, and similar units tied into intercom or keypad entry. We service nine automation brands and repair the motor that’s already on the property rather than steering you toward a replacement you don’t need. A seized motor after an ice storm or a control board that fails during a summer power surge is usually fixable the same week. For motor diagnostics, limit-switch calibration, and swing-arm replacement details, see Gate Motor & Opener in Burleson.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Burleson
Gate access control in Burleson means the systems that decide who gets through: keypads, remotes, phone entry, card readers, and video intercoms. Most of the calls we get are from homeowners whose keypad stopped working after a storm, whose remote won’t pair, or whose phone-entry box works fine at the gate but fails to ring the house. Because so many Burleson subdivisions share the same 2003-2015 construction window, we’re now seeing whole blocks where the original entry hardware is failing in the same season. That’s the nature of our Gate Access Control service: our technicians diagnose the existing wiring before replacing anything, and you get a documented record of what was found and what was changed.
Keypad Entry
Signs you need it
The keypad accepts some codes but not others, the backlight is dim or dead, or the gate opens on its own after a rain.
What it costs in Burleson
Keypad replacement in Burleson typically runs $180-$340 depending on brand and whether the existing wiring can be reused.
How we do it
We test the keypad’s output at the opener board, check for corrosion at the housing, replace the unit or the damaged wire run, and photograph the new programming in place.
Phone Entry
Signs you need it
Visitors press the call button at the gate and hear nothing, get a busy signal, or the call rings but never connects to your phone.
What it costs in Burleson
Phone-entry troubleshooting and repair usually falls between $150 and $400, and full system replacement runs $600-$2,500 depending on the head-end hardware.
How we do it
We trace the phone line or cellular module from the gate station to the house, replace the failed relay or SIM module, and log every wiring change for future service calls.
Remote Control
Signs you need it
The remote works intermittently, only from five feet away, or not at all even with fresh batteries.
What it costs in Burleson
Remote programming or replacement is usually $75-$250 per remote when new boards or receivers are not required.
How we do it
We read the existing receiver frequency, confirm the transmitter signal at the board, pair the correct remote, and hand you a written record of the coding.
Video Intercom
Signs you need it
The video feed is black, the audio cuts out, or the indoor monitor doesn’t power on even though the gate still opens.
What it costs in Burleson
Video intercom repair starts around $250 for wiring or monitor faults and runs $1,500-$4,000 for a full replacement with new hardware.
How we do it
We test the camera, the power supply, and the wire path back to the house, find the failed component, and replace only what’s failed.
What Gate Access Control Costs in Burleson
| Item | Typical range in Burleson |
|---|---|
| Keypad replacement | $180 - $340 |
| Phone-entry troubleshooting | $150 - $400 |
| Full phone-entry system | $600 - $2,500 |
| Remote programming or replacement | $75 - $250 |
| Video intercom repair | $250+ |
| Full video intercom replacement | $1,500 - $4,000 |
Can you install a keypad on an existing Burleson gate?
Yes. Most gates with a motor and a control board can accept a keypad, even if the original builder didn’t include one. We handle the wiring, programming, and compliance check for any HOA finish rules, then leave you a written record of the install. Call (817) 476-9945 for an exact quote.
Why does my phone-entry system fail every time it storms?
North Texas thunderstorms bring moisture into the gate station housing, and repeated cycles corrode the relay contacts or the phone module’s power connection. We seal and re-route the wiring so the next storm doesn’t knock the system out again. Call (817) 476-9945 and we’ll open the housing with you on site.
Gate Parts & Welding in Burleson
Gate parts and welding in Burleson is about repairing metal before it becomes a replacement job. The welded frames on ornamental iron driveway gates crack at the hinge plates, steel posts rust at the concrete line, and slide-gate rollers wear flat from years of opening over dry clay dust. We fix all of it, including custom-fabricated brackets and reinforcing plates for gates that were never braced properly when they went in. See our Gate Parts & Welding hub for the full scope.
Hinge Replacement
Signs you need it
The gate drags or scrapes at the latch, the hinges sag visibly, or you hear metal-on-metal groaning when it opens.
What it costs in Burleson
Hinge replacement in Burleson usually runs $150-$350 per hinge depending on gate weight and whether welding is needed to fit the new plate.
How we do it
We block the gate level, cut or unbolt the failed hinge, weld or mount the new one, and photograph the finished alignment before we leave.
Post Replacement
Signs you need it
The post leans more than two inches off plumb, the concrete around the base has a visible crack ring, or the gate no longer reaches the latch.
What it costs in Burleson
Post replacement with a new concrete footing typically falls between $400 and $900, more if helical anchors are required to resist the clay movement.
How we do it
We dig out the old footing, set the new post deeper than code minimum, brace it square, and pour a footer sized for the soil’s shrink-swell load.
Custom Welding
Signs you need it
A cracked frame member, a broken picket, a failed bracket, or a gate that flexes too much when pushed.
What it costs in Burleson
Custom welding for gate repairs in Burleson usually ranges from $150 for small bracket repairs to $600 for structural frame work, depending on time and materials.
How we do it
We repair the crack or fabricate a new bracket, weld it in place, grind the bead smooth, and match the finish so the repair disappears.
Gate Rollers
Signs you need it
The slide gate jerks or grinds as it moves, the rollers wobble on the track, or the gate has worn a flat spot into the wheels.
What it costs in Burleson
Roller replacement on slide gates typically runs $180-$400 including the new rollers and track alignment check.
How we do it
We lift the gate off the track, replace the worn roller assemblies, clean the track of debris and clay dust, and reset the travel limits so the gate rides true.
What Gate Parts & Welding Costs in Burleson
| Item | Typical range in Burleson |
|---|---|
| Hinge replacement (each) | $150 - $350 |
| Post replacement with footing | $400 - $900 |
| Custom welding (small bracket) | $150+ |
| Custom welding (structural frame) | $150 - $600 |
| Slide gate roller replacement | $180 - $400 |
Can you weld a cracked iron gate without removing it?
Yes, most frame cracks can be welded in place. We block the gate square first, make the repair, then grind and finish it so the repair matches the original paint line. Call (817) 476-9945 for an exact price.
Why do my gate posts keep leaning after every wet season?
Your posts are likely sitting in shallow footings that can’t resist the clay’s shrink-swell movement. We solve this with deeper concrete pours or helical anchors sized for Burleson’s soil, not just a generic two-foot hole. Call (817) 476-9945 and we’ll inspect the footing depth.
Brands We Service in Burleson
We work on Linear, Viking, Ghost Controls, and DoorKing systems, along with five other major automation brands. Most common control boards and receiver parts are stocked locally in our service vehicles, so Burleson repairs typically happen in one visit rather than waiting on a shipped part. See our brands for the full list.
Pricing for Gate Repair in Burleson, TX
| Service | Typical range in Burleson |
|---|---|
| Keypad replacement | $180 - $340 |
| Phone-entry troubleshooting | $150 - $400 |
| Full phone-entry system | $600 - $2,500 |
| Remote programming or replacement | $75 - $250 |
| Video intercom repair | $250+ |
| Full video intercom replacement | $1,500 - $4,000 |
| Hinge replacement (each) | $150 - $350 |
| Post replacement with footing | $400 - $900 |
| Custom welding (small bracket) | $150+ |
| Custom welding (structural frame) | $150 - $600 |
| Slide gate roller replacement | $180 - $400 |
Prices in Burleson push toward the higher end when a job involves HOA finish matching, deep clay footings, or a control system that was fried by a storm. Whatever the number, it is written down and handed to you before any tool comes off the truck. You’ll never get a surprise invoice at the end of a Burleson gate repair.
Neighborhoods We Serve in Burleson
We dispatch to every corner of Burleson, from the established subdivisions near Old Town to the newer communities off Renfro Street and the acreage roads south of County Road 528. Typical response time is same-day for repair emergencies and within two business days for scheduled installation work.
- Oak Valley
- Hidden Creek
- Mistletoe Hill
- Shannon Creek
- Briaroaks
Service Area - Cities Near Burleson
Our crews also work the surrounding south-Tarrant and Johnson County cities on a regular schedule. If you’re in Kennedale, TX, Arlington, TX, Fort Worth, TX, or Haltom City, TX, we can usually route a technician the same week. Call (817) 476-9945 to confirm your address is in our service area.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Burleson
We dispatch same-day for most Burleson gate repair calls where the gate is stuck open, stuck closed, or the motor is smoking. A live person answers the phone 24 hours a day, seven days a week, and we route the nearest Burleson truck to you. Call (817) 476-9945 and we’ll give you an arrival window before we hang up.
Sometimes. Many Burleson HOA communities require black powder-coated ornamental iron for all gate replacements, and some require design-review approval before installation. We check the community’s finish and design rules before ordering materials so you don’t get a violation notice after the fact.
Yes. We stock black powder-coat touch-up and can match most standard iron finishes on frame repairs, hinge replacements, and welded brackets. For custom colors, we color-match on site and apply a finish that blends with the original coat. Call (817) 476-9945 and we’ll tell you whether your finish is standard or custom.
Call (817) 476-9945 for a free, written estimate on any gate repair in Burleson, TX. A live person answers, we set the appointment, and the price is in writing before we start.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burleson Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.