Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Keller, TX
Gate access control in Keller most often means retrofitting a 1990s-era estate gate with modern keypad or phone entry, and the work here is shaped by black gumbo clay that shifts posts and seizes concrete operator pads. Gate parts and welding follow the same pattern: Keller’s custom homes from 1993-2015 are hitting end-of-life cycles for hinges, rails, and posts at the same time. Call (817) 476-9945 when a gate stops listening to its opener.
Why Keller Homes Are Different
Keller’s growth from the mid-1990s through the 2010s created a dense belt of custom estate homes, many on half-acre lots with ornamental iron automatic driveway gates. Those gates are now 15 to 25 years old and entering simultaneous end-of-life cycles for operators, hinges, and wiring. The city also holds working equestrian properties along Bear Creek and Old Keller Road corridors, where heavy agricultural pipe and wood ranch gates need a different repair approach than iron estate gates. Underneath all of it sits Blackland Prairie clay, the black gumbo that shrinks in summer drought and heaves in wet winters, tilting gate posts out of plumb and cracking concrete operator pads. Keller’s HOA communities with ornamental iron perimeter gates often require architectural-review approval before any visible component change, which means the written documentation we provide on every visit matters twice: once for the repair, once for the HOA file.
Our Main Keller Services
Keller homeowners call us most about two gate problems: operators that stopped responding and physical damage to the gate itself. Here is how each service works in Keller.
Gate Repair in Keller
Keller gate repair calls usually involve a gate that has drifted out of alignment, a hinge that has sagged, or an operator that runs but won’t move the gate. The black gumbo soil underfoot is often the hidden cause: posts tilt, gates bind, and motors burn out fighting the misalignment. Our Gate Repair in Keller page covers the full repair process, response times, and what a typical Keller repair costs before anyone picks up a tool.
Gate Installation in Keller
New gate installation in Keller has to account for the clay soil, the HOA review process, and the fact that many Keller lots are large enough to justify a full custom gate rather than a stock panel. We measure, quote, and schedule installs with the same written-price rule as repairs. Learn more on our Gate Installation in Keller page, including what a Keller install includes and what it runs.
Gate Motor & Opener in Keller
Keller has a large installed base of Viking and Linear operators from the 1990s and 2000s, many now orphaned or discontinued. Local technicians who know Keller keep retrofit kits on hand for these units because Keller’s high owner-occupancy rate means people want the motor they’ve had for 20 years repaired, not swapped for something new. Our Gate Motor & Opener in Keller page explains motor replacement, repair, and retrofit pricing for Keller.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Keller
Gate access control in Keller usually means adding a keypad, phone entry, or card reader to an existing automatic gate, or replacing an old intercom that no longer works. Keller’s estate homes from the 1993-2015 buildout often came with simple remote-only openers, and homeowners now want keypad codes for visitors, phone-based entry for deliveries, or video intercom at the driveway. This is the service that turns a gate into a managed entry point. Our Gate Access Control work covers everything from single keypads to multi-family video intercom systems.
Keypad Entry
Signs you need it
You are still handing out remote controls to house guests, landscapers, or delivery drivers because the gate has no code entry.
What it costs in Keller
Keypad entry installation in Keller typically runs $180-$340 depending on whether the keypad is wired or wireless and whether the existing opener has an open input.
How we do it
We mount the keypad at the driveway, wire it to the operator’s accessory input or pair it wirelessly, then program and test each code before we photograph the finished install.
Video Intercom
Signs you need it
You cannot see or talk to whoever is at the gate before opening it, and package theft or unfamiliar visitors are a real concern on your street.
What it costs in Keller
Video intercom systems in Keller run $550-$1,200 installed, with the range driven by camera resolution, night vision, and whether the indoor monitor is wired or wireless.
How we do it
We mount the camera station at the gate, run or pair the indoor monitor, connect the call function to your phone or wall unit, and leave a photo log of every wiring point before we finish.
What Gate Access Control Costs in Keller
| Item | Typical range in Keller |
|---|---|
| Keypad entry installation | $180-$340 |
| Phone entry system | $350-$750 |
| Video intercom system | $550-$1,200 |
Can you add a keypad to my existing gate opener in Keller?
Yes, in most cases. Nearly every operator we see in Keller has an accessory input for a wired or wireless keypad, including older Viking and Linear units. We confirm compatibility on site and give you the written price before any work starts. Call (817) 476-9945 for a free estimate.
Does Keller require HOA approval for gate access control changes?
It depends on your community. Keller HOAs with ornamental iron perimeter gates often require architectural-review approval before any visible component change, including a new keypad or intercom mounted at the gate. We document every install with photos you can submit to your HOA file.
Gate Parts & Welding in Keller
Gate parts and welding in Keller is about repairing what the clay soil and 20 years of use have broken: hinges that sagged, posts that tilted, rails that cracked, and rollers that seized. Our Gate Parts & Welding work starts with a documented inspection of the damaged component, then a written price for the repair or replacement before any welding begins.
Hinge Replacement
Signs you need it
The gate drags on the ground, the hinge pin is visibly worn or bent, or the gate sags lower on the latch side than the hinge side.
What it costs in Keller
Hinge replacement in Keller typically runs $160-$400 per hinge depending on gate weight, hinge size, and whether we weld the new hinge in place.
How we do it
We lift and support the gate, cut or unbolt the failed hinge, weld or bolt the replacement, and adjust the gate until it swings level again.
Post Replacement
Signs you need it
The gate post leans visibly, the gate no longer latches or closes square, or a concrete pad around the post has cracked and the post moves when pushed.
What it costs in Keller
Post replacement in Keller runs $400-$1,200 depending on post size, gate weight, and how much concrete has to be broken out of the black gumbo.
How we do it
We dig out the old post and footing, set the new post in fresh concrete at the correct depth for Keller’s clay soil, and brace it until the concrete cures before re-hanging the gate.
What Gate Parts & Welding Costs in Keller
| Item | Typical range in Keller |
|---|---|
| Hinge replacement | $160-$400 per hinge |
| Post replacement | $400-$1,200 |
| Custom welding repair | $60-$120 per hour plus materials |
Can you weld a cracked gate frame in Keller without replacing the whole gate?
In most cases, yes. We assess the crack, grind the area clean, weld the repair, and reinforce the joint if the gate is load-bearing. The written price includes all materials and the weld is photographed before and after. Call (817) 476-9945 to schedule an inspection.
How long does a post replacement take in Keller’s clay soil?
A single post replacement typically takes one day to dig, set, and brace. Concrete cure time before re-hanging the gate is usually 24 to 48 hours, depending on the season and the depth of footing required in Keller’s black gumbo.
Brands We Service in Keller
We work on nine major gate-automation brands including Viking, Ghost Controls, DoorKing, and Elite. Keller’s older estate communities commonly have Viking and Linear openers that are discontinued, so we keep retrofit kits and common parts stocked locally. See our brands for the full list and how we handle orphaned units.
Pricing for Gate Repair in Keller, TX
| Service | Typical range in Keller |
|---|---|
| Keypad entry installation | $180-$340 |
| Phone entry system | $350-$750 |
| Video intercom system | $550-$1,200 |
| Hinge replacement | $160-$400 per hinge |
| Post replacement | $400-$1,200 |
| Custom welding repair | $60-$120 per hour plus materials |
| Gate operator replacement | $400-$1,000 |
| Gate operator repair | $180-$400 |
What pushes price up in Keller is usually the clay soil: a post that has to be dug out of hardened black gumbo and re-set at a deeper footing costs more than the same post in sandier soil. Every price above is written down and handed to you before any work starts, per our Haven Standard Clause 1.
Neighborhoods We Serve in Keller
We serve every Keller neighborhood, including the estate communities near Keller Parkway and Bear Creek Parkway and the equestrian properties along Old Keller Road. Response time for most Keller repair calls is same-day, and we always give you the written price before work begins.
- Hidden Lakes
- Marshall Ridge
- Villages of Woodland Springs
- Estate communities near Keller Parkway
- Equestrian properties along Bear Creek and Old Keller Road
Service Area - Cities Near Keller
We serve Keller and the surrounding cities from our Dallas-Fort Worth office. If you’re in North Richland Hills, TX, Southlake, TX, Haltom City, TX, or Colleyville, TX, the same written-price rule and documented photo record apply to every job.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Keller
Most Keller repair calls are handled same-day. We dispatch from our Dallas-Fort Worth office and keep crews in the Keller area throughout the week. A live person answers the phone around the clock, and your technician’s name and photo are provided before arrival.
For repairs that restore the gate to its original condition, no approval is usually needed. For visible changes such as a new keypad, intercom, or gate color, Keller HOA communities often require architectural-review approval first. We provide photo documentation of every job you can submit to your HOA file.
Yes. The price we hand you in writing before any work starts is the price you pay, full stop. Material changes are quoted and approved in writing before anything additional is done. That is Haven Standard Clause 1, and we follow it on every Keller job without exception.
If you need gate access control, gate parts and welding, or any gate repair in Keller, call (817) 476-9945 for a free estimate. A live person answers, and the written price comes before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Keller Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.